SN100C Celebrates 20 Years of Reliable Service at IPC APEX EXPO 2019


Reading time ( words)

Nihon Superior Co. Ltd., an advanced joining material supplier, plans to exhibit in booth  no. 1334 at the 2019 IPC APEX EXPO, scheduled to take place January 29 - 31, 2019 at the San Diego Convention Center in California. The company will celebrate the achievements produced by the well-known SN100C lead-free alloy. SN100C (032) flux-cored solder wire will be introduced and SN100CVTM P608 D4 solder paste will be shown.

SN100C has been widely accepted as a leading lead-free soldering alloy since it was invented by Nihon Superior’s President Tetsuro Nishimura. The silver-free SN100C alloy delivers a stable microstructure in an alloy that can accommodate the long-term cyclic strains and impact loading to which a solder joint can be subjected. The micro-addition of nickel enhances the performance of SnCu, resulting in smooth and bright fillets with few shrinkage defects and a stable microstructure with minimal growth of the interfacial intermetallic, ensuring highly reliable solder joints.

The newly developed (032) is a general purpose, no-clean, halogen-free cored-flux. When paired with the SN100C lead-free alloy, it provides fast wetting and excellent solder joints, not only on copper (Cu) but also nickel (Ni) substrates. SN100C (032) is a good match for continuous robotic soldering due to the fast wetting and low spattering.

(032) cored-flux is available with the company’s new SN100CVTM lead-free alloy that gains its strength from solute atoms in the tin matrix as well as SAC305 solder.

SN2.jpgSN100CVTM P608 D4 is a completely halogen free, lead-free, no-clean solder paste. Unlike silver-containing alloys that derive their strength from a dispersion of fine particles of eutectic Ag3Sn, SN100CV gains its strength from solute atoms in the tin matrix of the joint. The paste provides excellent wetting and reduces voiding.

Nihon Superior continues to offer solutions to the challenges facing the electronics industry, such as improvements in reliability, thermally stable joining, and lead-free die attach. For more information about Nihon Superior’s new solder pastes and lead-free products, visit us in booth #1334 at the IPC APEX EXPO 2019.

Share

Print


Suggested Items

Impact of Stencil Foil Type on Solder Paste Transfer Efficiency for Laser-cut SMT Stencils (Part 1)

04/24/2019 | Greg Smith, BlueRing Stencils
As innovation and demand continue to drive miniaturization in electronics, manufacturers face the constant challenge of assembling smaller and smaller components with repeatable processes and high yields. Stencil printing is the first step in the PWB assembly process, and improvements to the SMT stencil can significantly improve yields, especially for more challenging miniaturized products.

SMTA Europe Electronics in Harsh Environments Conference 2019: A Preview

03/26/2019 | Pete Starkey, I-Connect007
As a prelude to this year's Electronics in Harsh Environments conference, which will be held on April 2–4, 2019 in Amsterdam, Netherlands, SMTA Europe chairman Keith Bryant, supported by technical specialist Bob Willis, showcased the challenges and key issues faced by design and process engineers worldwide, in a webinar entitled "Harsh Environment Failures—Causes & Cures."

Current Megatrends You Pay the Most Attention To

03/20/2019 | I-Connect007 Research Team
In our recent survey, we asked the following question: "What current megatrends do you pay the most attention to?" Below are some of the replies, edited slightly for clarity.



Copyright © 2019 I-Connect007. All rights reserved.