ESI’s Chris Ryder: There’s More to Choosing a Laser Than You Think
January 16, 2019 | Barry Matties, I-Connect007Estimated reading time: 11 minutes
At the recent HKPCA show, I sat down with ESI’s Chris Ryder, director of product management—HDI—to discuss considerations for choosing a new laser system, and how ESI uses its decades of flex and rigid-flex drilling experience to help guide customers in their decision-making process. We also discussed ESI’s newest, granite-less, Geode CO2 laser drilling system for the rigid HDI PCB manufacturing market.
Barry Matties: First, can you talk a little bit about your role at ESI and what ESI offers?
Chris Ryder: My role at ESI is to develop our HDI platform. ESI is a big player in the flex and rigid-flex market with our UV products. Several years ago, we started some product development on the rigid board manufacturing side of things. My job is to support continuous development into the HDI, substrate-like PCB and ICP space.
Matties: HDI is obviously an area that is growing. We're seeing HDI in more and more places. I think I was at a conference not long ago where Lee Ritchey, an iconic designer and instructor, said, "If you're not doing HDI now, you're about to be."
Ryder: That's a fair statement. It’s one of the reasons why the market is so attractive to us. Having come from HDI manufacturing myself, I've watched the market mature over the past decade and a half, and I've seen the HDI process demonstrate its merits—commercial and technological, as well as applications outside of just the handset market. This is where the technology got its initial foothold. Watching HDI develop into the automotive and industrial applications market, as well as being an element of the packaging market, has been a very interesting process.
And you're absolutely right, it's becoming very commonplace now, which is clearly reflected in the upshot of companies we're seeing across Asia and other markets. These are companies that start and upgrade to HDI; the base is rapidly growing.
Matties: When we look at HDI, there's a lot of conversation. You have a lot of experience, so what's your take on if HDI costs more or less generally speaking?
Ryder: Ultimately, you have to understand what the most important focus of your product is. Is it performance, size, cost? What is going to sell your product? For example, it’s relatively straightforward and obvious why miniaturization that you get from HDI would be a clear winner in a smartphone. When you look at other areas of application, it's not always as obvious. Especially when you talk about PC or automotive electronics, sometimes they have space for a PCB that doesn't have that dense of a fan-out or via structure.
But then when you look at material and real estate costs, as well as the utilization in panel manufacturing, these numbers start to change. Again, it depends on the overall product scope that you have. How much HDI do you have in your stack-up? Do you have a 1-n-1 or a 3-n-3? How much advantage can you take of that real estate reduction?
The major new drivers right now are areas like IoT and automotive. You have high-frequency applications calling for very specialized chipsets that fundamentally need to be fanned out through HDI-type structures. To some degree, your limitation is coming from the chipset or applications manufacturers. In essence, you're being forced into HDI design rules. Maybe that's what Lee Ritchey means when he talks about, "If you're not doing it now, you will be very soon.”
Matties: When we look at the definition of HDI, there are some evolving definitions.
Ryder: That’s true. It's an intriguing dynamic. Having been in the HDI industry for a while, it used to be just synonymous with laser vias. In the meantime, even in our own company at ESI, when I talk with management, customers, and suppliers, we try to reach an understanding of the product differentiation in that market. You end up having to apply different terminology such as HDI, SLP, ICP, or FCCSP, etc. to distinguish the design rules and materials necessary for those products.
With those distinctions come a host of other things that apply to us in the laser drilling industry such as via size, via quality, accuracy demands, and automation demands. It’s interesting to follow and see how the nomenclature has developed into these submarkets. It helps us to orient ourselves as to where our systems are being used, but like anything, it's a constant motion.
Matties: And the rate of change is accelerating.
Ryder: The rate of change accelerates with the rate of acceptance of HDI or the laser via as a nominal construct for an interconnect.
Matties: As a circuit board fabricator looking at HDI as a new market space, there's an investment of technology that they'd need to make—laser drill being one of those. What advice do you have for those people?
Ryder: The best advice I could give is to understand precisely what you want. I know that sounds trivial, but what you want comes down to what is ultimately going to earn you money. Is it going to be speed, yield, a diversity of materials, or a focus on one specific product type? Coming in from the laser drilling perspective, one of the things that we try to do is guide customers in that decision-making process. There are many different lasers and ways to guide and steer that beam. Further, many different platforms mechanically manipulate the product that you're cutting and drilling, so there are many options to explore.
Talking with your supplier about the options that you have is going to help optimize your return. Is it going to be yield focused? Yield focus might not be the primary driver for a prototype shop, for example. Meanwhile, relevancy might be more determined by the diversity of base materials that you're seeing. An HVM manufacturer clearly is going to focus on the highest amount of throughput they can get and the highest degree of automation. Again, understanding what you want and what's going to make you money will help us facilitate that need.
Page 1 of 2
Suggested Items
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources: