Congratulations to New IPC Hall of Famer Leo Lambert


Reading time ( words)

Everyone at I-Connect007 would like to congratulate Leo Lambert on his induction into the IPC Raymond E. Pritchard Hall of Fame. As vice president and technical director of EPTAC Corporation, Leo is a staunch advocate for improving technical training, industry standards, and certifications.

He's also an all-around great guy, and a lot of fun to talk with at trade shows. We're all excited for Leo, and we're glad to see him receive this honor after more than four decades of service to this industry. 

Once again, congratulations, Leo!

Share

Print


Suggested Items

Dana Korf: What Fabricators Expect From Designers

06/18/2020 | I-Connect007 Editorial Team
Andy Shaughnessy and Barry Matties spoke with Dana Korf, former chief PCB technologist for Huawei and currently principal consultant of Korf Consultancy, about the breakdown in communication between manufacturers and designers. Dana discusses exactly what a fabricator expects from a PCB designer, why these expectations are often not met, and the need for designers to make mistakes so that they can learn from them.

A Design Economics Horror Story

05/07/2020 | Rick Hartley, RHartley Enterprises
During a recent conversation with Rick Hartley, he shared one of his favorite PCB design horror stories. This is a cautionary tale about what can happen when design teams place too much faith in app notes and do not follow cost-aware design techniques. Enjoy!

The Formation of the Printed Circuit Engineering Association

04/02/2020 | Patty Goldman, I-Connect007
Patty Goldman spoke with Gary Ferrari, FTG Corporation, at IPC APEX EXPO 2020 about the formation of the Printed Circuit Engineering Association, which—having been started two months ago—has attained lots of interest from the industry. The PCEA hopes to bring together designers, engineers, fabricators, assemblers through local chapters to focus mainly on education and learning.



Copyright © 2020 I-Connect007. All rights reserved.