3D Metrology Market Expected to Reach $16.2 Billion by 2024
February 8, 2019 | PRNewswireEstimated reading time: 2 minutes
The 3D metrology market was valued at $9.5 billion in 2018 and is expected to reach $16.2 billion by 2024, at a CAGR of 9.3% from 2018 to 2024. The major driving factors for the 3D metrology market are the highly accurate inspection owing to 3D data for modelling and analysis, focus on quality control, and increase in R&D spending. However, lack of expertise to efficiently handle 3D metrology systems and high cost incurred for setting up the 3D metrology facility are expected to limit the growth of this market.
Hardware Segment to Hold Largest Market Share Among Other Offerings in 2018
Increasing adoption of 3D metrology equipment in industries such as aerospace & defense, automotive, architecture and construction, medical, electronics, energy & power, and heavy machinery to maintain product quality is the major driver for the growth of the hardware market.Also, the growing market for CMM drives the growth of hardware offering in the 3D metrology market.
CMM is required in the automotive industry for inspection, measurement, and quality checking of various components. The automotive industry has been increasingly using optical measurement systems and CMMs instead of conventional strain gauges, accelerometers, transducers, and extensometers for improving the safety and comfort level of a vehicle.
3D AOI to Grow at Highest CAGR from 2018 to 2024
3D AOI inspection technology serves as an effective tool for volumetric and co-planarity inspections. It also provides details on height information of lead tips, BGAs, chip components, and reflowed solder fillets, as well as critical dimensional information of any height-sensitive component.
Reverse Engineering Continues to Grow at Significant Rate during Forecast Period
Reverse engineering is used in industries for 3D modelling, reconstruction from the scanned data, and data for digital simulation. Both CMMs and 3D scanners are used for reverse engineering.
However, using 3D scanners is advantageous as the measurement of soft or fragile parts, and detection of a large number of points can be done in a short time. Reverse engineering is used in areas such as turbine blades, car body parts, engine parts, gears, antennas, boat parts, and medical implants.
Aerospace & Defense Industry is Among Major Contributors in 3D Metrology Market
Manufacturing and assembling of an aircraft require a high level of accuracy in which 3D metrology plays a vital role.In the aerospace industry, 3D metrology processes are used for making precision parts such as frames, wings, sub-assemblies, simulators, test beds, and engines.
In 3D metrology, laser trackers and portable arm coordinate measuring machines are used to ensure that the calibration of the equipment meets the quality standards and regulations for critical aerospace and aeronautic components.
North America to Witness Highest Growth during Forecast Period
The large market share is owing to the growing aerospace and automotive industries in North America and the presence of a large number of distributors for metrology equipment.The continuous technological advancements and financial support from the government further propel the growth of this market.
Suggested Items
Indium Corporation to Present, Exhibit at EPP InnovationsFORUM
03/28/2024 | Indium CorporationIndium Corporation is set to present and exhibit at EPP InnovationsFORUM, one of Europe’s premier single-day electronics manufacturing forums, on April 17 in Leinfelden-Echterdingen, Germany. Topic areas for 2024 will include AI, automation, sustainability, and quality.
Reducing Nitrogen Consumption in Convection Soldering with Rehm Thermal Systems' Patented Mechatronic Curtain
03/28/2024 | Rehm Thermal SystemsCurrent developments indicate a need for larger throughput heights due to the trend towards e-mobility, which in turn increases nitrogen consumption for process inertization. Rehm Thermal Systems responds to this issue with an innovative solution: the mechatronic curtain.
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
ITW EAE Wins New Product Introduction Award for Electrovert® Wave Soldering Machine Deep Wave
03/26/2024 | ITW EAEITW EAE is proud to announce that it has earned a 2024 New Product Introduction (NPI) Award for Electrovert’s Deep Wave option for wave soldering machines. This new, innovative system provides the ability to pump up to a 20 mm wave height.
Mek's Next-Gen AOI Technology Takes Center Stage at IPC APEX EXPO 2024
03/19/2024 | MEKMek is excited to announce its presence at IPC APEX EXPO, North America's largest electronics manufacturing event, in Anaheim, California, from April 6-11, 2024. Attendees are invited to visit Mek at booth #1433 to explore the latest AOI technology offerings.