RTW IPC APEX EXPO 2019: LPKF Highlights Laser Processing Tech, Glass Drilling Capabilities


Reading time ( words)

Guest Editor Joe Fjelstad sits down with Stephan H. Schmidt, LPKF president, who provides an overview of the company's laser processing machine and their capabilities, and highlights the new glass drilling capabilities.

To watch the interview, click here.

Share

Print


Suggested Items

Prototron Receives MIL-31032 and AS9100 Certifications

10/22/2019 | Steve Williams, The Right Approach Consulting LLC
Kim O’Neil, general manager of Prototron Circuits in Tucson, Arizona, discusses the company’s recent MIL-31032 certification and how this experience prepared them for the AS9100 certification. He also explained why auditing is a good thing for any company’s processes and highlighted some of the areas that the auditors inspected.

EIPC Summer Conference 2019, Day 1

09/10/2019 | Alun Morgan, EIPC
The beautiful city of Leoben in central Austria provided the setting for the EIPC 2019 Summer Conference. In this article, EIPC Chairman Alun Morgan provides the highlights of the first day of the event, including a recap of the technical presentations.

Selecting the Proper Flex Coverlayer Material

09/06/2019 | Dave Lackey, American Standard Circuits
Coverlayers are polymer materials used to cover and protect the copper traces of the flex circuit product. There are a number of different options available for protecting the circuits, and they serve different design requirements in terms of cost, performance, and flexural endurance optimization. When specifying the choice, it is critical to call out not just the type of coverlayer material but also the thickness requirement. This can be very important in certain types of constructions, especially when a flex circuit will experience dynamic flexing during use.



Copyright © 2019 I-Connect007. All rights reserved.