Mentor and Aberdeen Paper: Best Practices for Electronics Design Executives


Reading time ( words)

In the face of growing business pressures and internal challenges, electronics product development is fraught with risk. There are, however, certain best practices that reduce these risks if they include a fully integrated and optimized multi-domain solution—supporting mechanical, electronic, electrical, and software.

Mentor, a Siemens business, and the Aberdeen Group collaborated on this report, which provides best practices based on primary research conducted with industry practitioners, giving managers valuable insight into the processes of the most successful companies in electronics design.

To read this white paper, click here.

Share

Print


Suggested Items

Chris Hanson: New Ventec IMS Dielectrics Rated for Higher Temps

07/07/2020 | Andy Shaughnessy, Design007 Magazine
Andy Shaughnessy recently spoke with Chris Hanson, global head of IMS Technology for Ventec International Group. During their conversation, Chris discusses his group’s recent efforts to create new IMS materials, with a focus on dielectrics. As Chris explains, Ventec has developed several new dielectrics that can withstand much higher operating temperatures, one of which is UL-rated for a maximum operating temp of 155°C, which may be the highest for an IMS dielectric.

Just Ask Happy: PCB Design For EE Undergrads?

07/02/2020 | I-Connect007 Editorial Team
We asked for you to send in your questions for Happy Holden, and you took us up on it! The questions you've posed run the gamut, covering technology, the worldwide fab market, and everything in between. Enjoy.

PCB Builder from Digi-Key Lets Customers Order Directly From Board Shops

06/04/2020 | Andy Shaughnessy, Design007
On June 2, components distributor Digi-Key Electronics announced the release of PCB Builder, a tool that lets customers have PCBs shipped directly from the fabricator. PCB Builder also allows customers to perform file layer checks and receive instant quotes from multiple fabricators. Andy Shaughnessy spoke with Josh Mickolio, supplier business development manager for Digi-Key, about the development of PCB Builder and what this tool means to PCB designers and design engineers.



Copyright © 2020 I-Connect007. All rights reserved.