Researchers Develop New Flexible Solar Cells
April 17, 2019 | Chinese Academy of SciencesEstimated reading time: 1 minute
A joint research team has developed a new type of highly flexible and stable solar cell that could be used in wearable electronics.
The power supply is vital to the safety of wearable electronics. Perovskite solar cell (PSC) has been widely used to manufacture flexible batteries because it is highly efficient, cheap, and easy to use.
Perovskite is a material with the same type of crystal structure as calcium titanium oxide.
The flexible substrate is the key factor to determine the performance of PSCs.
Current PSCs are mainly made of a polymer substrate, which has been proven fragile, unstable and is not adequately waterproof.
Researchers from the Shenzhen Institutes of Advanced Technology under the Chinese Academy of Sciences built a new type of PSC based on an inorganic mica substrate, which could reduce the strain in the device even under large bending deformation.
Mica is a mineral that separates easily into small flat transparent pieces of rock.
The mica-based PSCs exhibit a high-efficiency conversion of sunlight into electricity, with a photovoltaic conversion efficiency of 18 percent. It can also retain more than 91.7 percent of the original conversion efficiency after 5,000 cycles of large deformation bending, according to researchers.
In addition, the new PSCs are relatively stable against humidity under elevated temperatures.
The study was published in the latest issue of U.S. journal Nano Energy.
Researchers from Shijiazhuang Tiedao University in Hebei Province and Chiao Tung University in Taiwan participated in the study.
Suggested Items
OE-A at LOPEC: Printed Electronics Powers Sustainability
02/06/2024 | OE-AThe “OE-A Competition 2024” shows the many possibilities of flexible, organic, and printed electronics with inspiring products, prototypes, and fresh designs live at LOPEC 2024, the leading international exhibition and conference for flexible, organic, and printed electronics in Munich.
All Flex Solutions Invests in New Flexible Circuit Facility
02/05/2024 | All Flex SolutionsAll Flex Solutions has started the equipment build-out of a completely new flexible circuit manufacturing facility in Minneapolis. The building was purchased in 2020, and was completely renovated to accommodate the company’s plans for a brand new state-of-the-art flexible circuit fabrication plant.
Flexible Printed Circuits: A Design Primer
12/19/2023 | Chris Keirstead, PFC Flexible CircuitsFlexible circuits consist of conductive strips in a sandwich of insulating or dielectric material. They resist moisture and contamination and are insulated from external shorts, with holes or contact surfaces for interconnection. Understanding a package’s electrical requirements and not over-designing permits means taking full advantage of a flexible circuit’s potential compared to conventional wiring.
Intel Technology Helps Power Solution for a More Resilient Grid
11/29/2023 | IntelAhead of Enlit Europe, Intel announced that its technology is helping power the Edge for Smart Secondary Substations (E4S) Alliance’s new solution to modernize the energy grid.
Würth Elektronik Launches Research Project HyPerStripes
11/27/2023 | Wurth ElektronikHyPerStripes project partners will create a technology platform including manufacturing techniques for roll-to-roll (R2R) processing as well as the integration of electronic components onto very long ("endless"), flexible and stretchable printed circuit boards.