Register Now for Mentor's DFM Analysis Webinar on Oct. 16


Reading time ( words)

Historically, design-for-manufacturability (DFM) checks have taken place during the fabrication process and have typically been performed by PCB manufacturing engineers or fab houses utilizing DFM-specific analysis software. The typical PCB designer would only run their own built-in prefabrication DRC and integrity checks prior to sending out for manufacturing and wait to hear back from the fabricator if issues were encountered.

Today, DFM analysis allows you to identify and correct potential fabrication and assembly issues in the design database before they hit the production floor. Without DFM, you leave changes in the manufacturer’s hands, where the focus is on increasing yield, not on the electrical performance of the final product.

In this webinar by Mentor, a Siemens business, attendees will learn how PADS Professional can empower you to eliminate costly manufacturing delays by minimizing supplier call-backs and design re-spins.

What You Will Learn

  • Common DFM issues that cause delays in fabrication 
  • Common DFA issues that cause delays in assembly 
  • Panelization using PADS Professional's FabLink 
  • Producing an output file: ODB++ vs. Gerber
  • Proper data to include in design for fabrication and assembly

Who Should Attend

  • Engineering managers
  • Electrical and hardware engineers
  • PCB designers

Date/Time

Oct 16, 2019
2:00 PM - 3:00 PM Europe/London

 

Oct 16, 2019
2:00 PM - 3:00 PM US/Eastern

Click here to register for this free webinar.

 

Share

Print


Suggested Items

Just Ask Happy: Manufacturing Issues From a Designer’s Viewpoint

07/23/2020 | I-Connect007 Editorial Team
We asked for you to send in your questions for Happy Holden, and you took us up on it! The questions you've posed run the gamut, covering technology, the worldwide fab market, and everything in between. Enjoy.

Chris Hanson: New Ventec IMS Dielectrics Rated for Higher Temps

07/07/2020 | Andy Shaughnessy, Design007 Magazine
Andy Shaughnessy recently spoke with Chris Hanson, global head of IMS Technology for Ventec International Group. During their conversation, Chris discusses his group’s recent efforts to create new IMS materials, with a focus on dielectrics. As Chris explains, Ventec has developed several new dielectrics that can withstand much higher operating temperatures, one of which is UL-rated for a maximum operating temp of 155°C, which may be the highest for an IMS dielectric.

PCB Builder from Digi-Key Lets Customers Order Directly From Board Shops

06/04/2020 | Andy Shaughnessy, Design007
On June 2, components distributor Digi-Key Electronics announced the release of PCB Builder, a tool that lets customers have PCBs shipped directly from the fabricator. PCB Builder also allows customers to perform file layer checks and receive instant quotes from multiple fabricators. Andy Shaughnessy spoke with Josh Mickolio, supplier business development manager for Digi-Key, about the development of PCB Builder and what this tool means to PCB designers and design engineers.



Copyright © 2020 I-Connect007. All rights reserved.