Meet Ray Prasad, SMT007 Columnist


Reading time ( words)

Meet Ray Prasad, one of our SMT007 columnists! Prasad’s columns explore DFM, manufacturing processes, yield improvement, quality control, IPC standards, and much more.

Ray Prasad is the president of Ray Prasad Consultancy Group and author of the textbook Surface Mount Technology: Principles and Practice. Prasad is also an inductee to the IPC Hall of Fame—the highest honor in the electronics industry—and has decades of experience in all areas of SMT, including his leadership roles implementing SMT at Boeing and Intel; helping OEM and EMS clients across the globe set up strong, internal, self-sustaining SMT infrastructure; and teaching on-site, in-depth SMT classes.

Read “SMT Solver” in SMT007 Magazine. Subscribe today!

Share

Print


Suggested Items

SMTA Europe Solder Finish Webinar Addresses Defects Causes and Cures

12/14/2020 | Pete Starkey, I-Connect007
“What is your most common PCB problem?” A survey conducted by Bob Willis had revealed finish solderability to be the predominant contender, and it was clear that the choice of solderable finish applied to surface mount boards could have a significant effect on the assembly yield and cost of the final circuit. SMTA Europe organised an informative and enlightening webinar this month entitled “Guide to PCB Solder Finishes—Process Defects Causes and Cures,” with soldering specialist Bob Willis as presenter.

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2021 I-Connect007. All rights reserved.