-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Why Does the PCB Industry Still Use Gerber?
November 7, 2019 | Karel Tavernier, UcamcoEstimated reading time: 2 minutes
Every so often, I hear technologists ask why so many PCB designers still use Gerber. That is a fair question. Ucamco has over 35 years of experience in developing and supporting cutting-edge software and hardware solutions for the global PCB industry. Our customers—small, medium, and large PCB fabricators—include the electronics industry’s leading companies, and many of them have been with us for over 30 years. We are dedicated to our industry and excellence in everything we do, which includes our custodianship of the Gerber format.
Data Intelligence
With us, the Gerber format has undergone a significant evolution in the past 10 years, and a near revolution in the past five years alone. Like the previous Extended Gerber (X1) format, today’s Gerber X2 is simple, easy to use, and freely available to our industry, but simple and free doesn’t mean dumb—far from it. Thanks to the use of cleverly designed attributes, Gerber X2 is an intelligent format that can do all of the things that some critics say it can’t. Gerber X2 can differentiate between pins, vias, and traces, and anyone who cares to read section 5.6 of the Gerber X2 specification will see that it does so in more detail and with greater precision than the ODB++ and IPC-2581 formats.
The industry’s professionals know this because we talk with our customers daily and listen very carefully to what they tell us about being at the electronics production coalface. What they tell us is confirmed by a quick glance at the industry’s use of the different formats. IPC-2581 is used for a negligible fraction of the world’s fabrication data sets, ODB++ is used for 5%, Gerber X2 is used for 10%, and the rest—the vast majority—uses the traditional Gerber X1 format.
Supporters of ODB++ and IPC-2581 point to the “intelligence” of these PCB data formats, but Gerber X2 is the global PCB industry’s most popular intelligent PCB data format. Sure, these formats are more intelligent than the old Gerber X1, which can’t differentiate between SMD and BGA pins. But when ODB++ was launched, it did not contain any component information either.
Figure 1 shows an apples-to-apples comparison of ODB++, IPC-2581, and Gerber X2. These screenshots from the Reference Gerber Viewer illustrate the level of information carried in a current Gerber X2 file. The pad selected on the left is identified as a via pad, and the pad selected on the right is identified as a copper-defined SMD pad, and as pin 1 of R13 with net /IRQ-7. With Gerber X2, a designer can easily distinguish between a pin, via, and trace.
To read this entire article, which appeared in the September 2019 issue of Design007 Magazine, click here.
Suggested Items
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources: