Innovators Awards 2019 Military and Aerospace Electronics Intelligent Aerospace
December 10, 2019 | Intelligent AerospaceEstimated reading time: 14 minutes
Military & Aerospace Electronics and Intelligent Aerospace have announced their 2019 Technology Innovators Awards to recognize companies offering substantial military, aerospace, and avionics design solutions.
Awards are in three tiers -- ranging from platinum, the highest, to the gold awards, and finally to the silver awards -- and are based on the recommendations of an independent panel of industry judges.
Platinum awards
The ISL7104xM plastic-packaged, radiation-tolerant pulse-width modulator (PWM) controller and gallium nitride (GaN) field-effect transistor (FET) driver for new space small satellites from Renesas Electronics America Inc. in Milpitas, Calif., are for use in power supplies in satellites operating in low Earth orbit. These characteristics include inherent radiation tolerance, plastic packaging, small die size, no parasitic p-n diode and fast switching, increased efficiency, and small total size.
The SGRB series DC-DC converter from VPT Inc. in Blacksburg, Va., is a commercially available GaN-based, space-qualified line of DC-DC converters that is radiation tolerant and achieves high efficiency to 95 percent. It is for applications facing the harsh radiation environments of space, and includes a fixed-frequency reduced voltage switching topology for low input and output noise. This makes it well-suited for space-borne telecommunications where high efficiency, low noise, and radiation tolerance are imperative.
The 7 series microwave and RF Assemblies from W. L. Gore & Associates in Newark, Del., are engineered to prevent the ingress of water vapor, fuels, oils, chemicals, and other hazardous contaminants commonly found in airborne environments. With their rugged, vapor-sealed construction, these assemblies maintain low insertion loss, low return loss, and phase stability at frequencies to 18 GHz, while providing shielding effectiveness in challenging aerospace environments.
The 1.8-millimeter simplex aerospace fiber optic cables from W. L. Gore & Associates help provide weight and cost savings over the life of an aircraft, while meeting the rigorous demands of in-flight operation. These optical fibers deliver signal integrity for high-speed data transmission in a wide range of temperatures, and resist crushing, kinking, and abrasion to handle complex routing, maintenance activities, and repeated flight conditions. The cables also have a compact, flexible footprint with installed robustness that meets size, weight and routing constraints as more high-tech avionics are being installed or retrofitted into civil aircraft.
The Multi-Modal Sensor Pod (MMSP) from Logos Technologies LLC in Fairfax, Va., combines Wide-area motion imagery (WAMI), hyperspectral, and high-definition spotter sensors in one compact, lightweight package. The persistent-surveillance sensor also includes 15-plus times the normal coverage of hyperspectral imaging; high-definition spotter; automatic cross-cueing between sensors; multiple, in-flight ground scanning options;; a small onboard multi-modal edge processor with extremely high data digestion rates; and the ability to display different data streams in its user interface.
The RFT-3200 microwave downconverter with dynamically adjustable IF from Mercury Systems in Andover, Mass., uses a dynamically adjustable IF architecture to enable users to set the IF frequency and bandwidth in real-time to achieve mission-to-mission optimization and compatibility with a wide-range of digitizers. The RFT-3200 also offers wide band performance with RF to 40 GHz and IBW to 2 GHz for circumstances that require processing emerging threats that exceed the frequency limitations of standard RF hardware. Additionally the RFT-3200 supports industry-leading phase noise, phase coherent operation, and multiple configuration options.
Space Active Optical Cable (SAOC) from AirBorne Inc. in Georgetown, Texas, is screened for reliability. Compared to traditional fiber optics or traditional active optical cables, the SAOC is a rugged solution that can withstand g-forces of launch, radiation in space, and quickly can be installed. There are no fiber cleaning concerns with AirBorn's AOC because the solution uses a traditional copper electrical interconnect. This allows the technology to quickly be deployed on the battlefield to bring high speed applications to life.
The Helix Virtualization Platform from Wind River Systems in Alameda, Calif., Wind River Helix Virtualization Platform is a software-development tool based on a certifiable Type-1 hypervisor that enables applications with different levels of criticality to run simultaneously on one multi-core system. In addition to the VxWorks real-time operating system, the Helix Platform comes with Wind River Linux and Simics for turn-key application development. The tool follows standard APIs such as ARINC 653 APEX API, FACE, POSIX, and VxWorks, and supports unmodified guest operating systems, OS-agnostic virtualization, and separation technology.
The HUNTR TDL hub and network translator from the Curtiss-Wright Corp. Defense Solutions division in Ashburn, Va., enables joint terminal attack controllers (JTACs) and Tactical Air Control Parties (TACPs) to create a multi-tactical datalink network that supports SADL, Link 16, Cursor on Target, and VMF Combat Net Radio (CNR) data exchanges among ground forces, aircraft, ships, and command-and-control elements. This software application improves and simplifies the real-time translation and routing of tactical data links, and provides warfighters and command and control centers with real-time access to operational data in the field.
The Connext DDS Secure data-centric connectivity framework enables military and aerospace system architects to build secure and scalable systems of systems. It uses decentralized, peer-to-peer connectivity to support fine-grained security, high performance and reliability requirements, and helps deliver authentication, access control, encryption, data tagging, and logging of security events. These capabilities enable users to choose between non-secured, signed and encrypted topics to meet military and aerospace performance needs. Connext DDS Secure applies data security at the software application level so that it is independent of the underlying network type and protocol.
Gold awards
Innovators 2 ZmicroThe Orion 32-inch rugged 4K display from ZMicro in San Diego offers the ability to integrate a variety of video sources on one display; small size, weight, and power consumption (SWaP); and improved visibility in degraded visual environments. The Orion 32 can consolidate video inputs from as many as five sources and display streams using Virtual Windows that project each video stream to a dedicated window of any size or location or order on the display. Virtual Windows can switch dynamically to a new size and or location. The Orion 32 4K display offers efficient use of pixels, and its 3840-by-2160-pixel display is equivalent to four full HD displays.Page 1 of 3
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.