StratEdge Features Semiconductor Packages and Assembly Services at Three Trade Shows in March
February 25, 2020 | StratEdgeEstimated reading time: 1 minute
StratEdge Corporation, leader in the design, production, and assembly of high-frequency and high-power semiconductor packages for microwave, millimeter-wave, and high-speed digital devices, will have applications specialists available at the IMAPS Device Packaging Conference, APEC 2020, and GOMACTech 2020 to discuss the many packages available for DC to 63+ GHz and its package assembly services.
Packages include:
- Post-fired ceramic, low-cost molded ceramic, and ceramic QFN packages
- The LL family of leaded laminate copper-moly-copper (CMC) base packages
- High-power semiconductor packages
- Off-the-shelf molded ceramic packages that can be configured to meet the requirements for chips with frequencies up to 18 GHz. These packages provide enhanced thermal dissipation for high-power gallium nitride devices and come in fully hermetic versions in over 200 standard outlines.
- High-reliability packages that meet stringent military applications. The packages have electrical transition designs that ensure exceptionally low electrical losses and operate efficiently, even at the highest frequencies.
"Much attention is given to GaN chips, but the package in which the GaN device is attached and the way the chip is attached to the package is often overlooked," explained Casey Krawiec, VP of global sales for StratEdge Corporation. "It's well known that GaN chip efficiency and reliability can be improved by creating a package environment that reduces chip-to-package junction temperatures. StratEdge has developed a proprietary eutectic die attach method that drops junction temperatures by 20 degrees when compared to standard assembly methods with ceramic packages. Please stop by our booths and find out more."
StratEdge will be at IMAPS Device Packaging Conference, Fountain Hills, AZ, from March 3-4 in booth 56, APEC 2020, New Orleans, LA, from March 16-18 in booth 2157, and at GOMACTech 2020, San Diego, CA, from March 17-18, in booth 202.
Suggested Items
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources: