Multi-board Etching: Managing Rigid-Flex Designs and Conductivity

Reading time ( words)

When I was a very young boy, my dad would delight and tease me by flexing his muscles. He did this with a very special flourish. Rather than simply flexing, he would put his thumb in his mouth, blow, and flex, which gave the appearance that huffing and puffing on his thumb made his bicep pop out. This was a great show for a little boy.

In PCB design, we work with a different type of flex. Advances in consumer and industrial electronic devices have allowed manufacturers to produce smaller devices that have more functionality.

Those devices use rigid-flex designs that provide the form factors needed for portability and—many times—include multiple interconnected boards. With all the interconnections between the boards, PCB designers pay equal attention to signal paths and to the electrical connectivity between boards. On the mechanical design side of things, each board must fit within an enclosure that meets the product specifications. As a result, every multi-board design combines electronic design automation (EDA) with mechanical engineering design (MCAD).

The Sum Is Greater Than the Whole
Good troubleshooting techniques involve considering a system as individual parts rather than as a whole. The same techniques apply to your work with multi-board PCB designs. Each board consists of a single unit that has its own lifecycle.

Some product designs may use a single PCB design for multiple functions or for multiple devices. Others may interconnect multiple PCB designs to produce a complete, fully functional system. Depending on the product design, a single PCB design may have multiple uses. No matter the method, the multi-design represents an overall approach to system design.

To read this entire article, which appeared in the February 2020 issue of Design007 Magazine, click here.


Suggested Items

FCT: Powerful Growth in the Flex Segment

08/31/2022 | Andy Shaughnessy, I-Connect007
After the initial impact of the global pandemic led to a somewhat flat 2020, Carey Burkett, vice president of Flexible Circuit Technologies, explains how the company’s growth took off in 2021, positioning it well for industry trends that continue to show great promise in medical, automotive, consumer, and more. In this interview, Carey breaks down the reasons behind the company’s recent success and how R&D, and a new Zhuhai facility, have positioned them for continued growth.

Flexible Hybrid Electronics Design: Reducing Time to Market

03/23/2022 | Sean Nachnani, NextFlex
Emerging innovations in the flexible hybrid electronics (FHE) domain are enabling new applications across multiple industries due to their highly flexible structures and additive manufacturing processes. The smaller form factor, lighter weight, and conformal capabilities are ideal for IoT edge devices in health and fitness monitoring, military asset identification and tracking, automotive displays and sensors, aerospace radar, and soft robotics. Significant industry research led by NextFlex is optimizing the processes from design through manufacture for FHE products.

Just Ask Tara Dunn: Why Don’t Fabricators Provide More Feedback to Designers?

11/10/2020 | I-Connect007 Editorial Team
First, we asked you to send in your questions for Happy Holden, Joe Fjelstad, John Mitchell, and others in our “Just Ask” series. Now, it’s Tara Dunn’s turn! Tara is the vice president of marketing and business development for Averatek. A regular Flex007 columnist, Tara discusses flexible circuits, rigid-flex, and rigid PCBs, as well as RF/microwave technology, microelectronics, and additive processes. She is also co-founder of Geek-a-Palooza and a show manager for the SMTA Additive Electronics TechXchange event. She has over 20 years of experience in the PCB industry. We hope you enjoy “Just Ask Tara.”

Copyright © 2022 I-Connect007 | IPC Publishing Group Inc. All rights reserved.