-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
This Month in Design007 Magazine: Design Economics With Kelly Dack
April 9, 2020 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes
I recently spoke with Kelly Dack—CID, CID+, and a PCB designer and instructor who has worked in the design and manufacturing segments over the years. Thanks to his background, Kelly provides an intriguing viewpoint on cost-aware design and the philosophy of design economics in general.
Andy Shaughnessy: Kelly, you’ve written about cost and profit in PCB design. Give us a basic overview of your thoughts on design economics.
Kelly Dack: Considering cost in design is tricky because there are so many facets of cost. First, it’s expressed in product development as “time-to-market.” How much is a company losing by not having this product? It depends on priorities. I’ve always said that the first priority is meeting a performance specification and then meeting a cost specification. But in this tricky industry, if you miss either constraint—cost or performance—you may not have a product.
And rarely do I see a cost constraint on the front end of a PCB design project. In fact, I just had a conversation with an engineer regarding using a new chip and a new sensor to drive down the cost of a product, which has been on the market for years. Here’s where it gets tricky: You may not necessarily save money by using a less expensive component. Component packages can have many different form factors, and each may require different design techniques, which could offset any cost savings. A proposed new chip may require a more expensive design process, manufacturing process, materials requirement, or all three. It’s never simple. It really requires some good analysis by all of the project stakeholders.
Shaughnessy: Before you begin layout, what are some criteria that you keep in mind for cost-aware design?
Dack: The first thing is to define products by classes. What type of class does the product belong to? Is it a disposable product? Is it a product that has a dedicated use, or is it a product that needs high reliability? These are all different types of product classifications that will play into how much the product should cost.
For instance, a disposable/throwaway calculator that you buy at a dollar store would be presumed to use less costly components, higher volumes, and techniques to reduce the cost so that a profit would be realized by selling the product in volume. However, a spy satellite or a control mechanism in the cockpit of an airplane will most certainly be more costly due to its limited volume of production and it’s higher reliability requirements. The components and parts used in the product have to undergo rigorous testing, which all add cost to the individual components, and that will add cost to the overall product. Then, there are the specifications and regulations that will add to the timeline and cost.
To read this entire interview, which appeared in the April 2020 issue of Design007 Magazine, click here.
Suggested Items
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.