Cyberattack! Think It Couldn’t Happen To You? Think Again!
July 15, 2020 | Barry Matties, I-Connect007Estimated reading time: 2 minutes
Cybersecurity is a necessity in every business, and this interview is a must-read for helping you and your company to understand vulnerabilities and protect yourself from attacks. Remember, until an attack hits you, you have no idea how devastating it can be.
Eric Cormier and Dave Ryder of Prototron address the ransomware attack that locked them out of their system last December, bringing business to a screeching halt and forcing them into the arduous process of a full rebuild. With things finally starting to normalize, Eric and Dave now offer precautionary advice they’ve accumulated over the past six months.
Barry Matties: Eric, to set up this conversation, your company was hit with ransomware. Somebody locked you out of your system and demanded a ransom.
Eric Cormier: Yes, and it was actually Friday the 13th in December 2019. It was not a good day. From what we’ve been able to trace, it came from a piece of equipment that we utilize for certain processes in the shop. It looks like somebody got onto the internet and accidentally clicked on some links.
With ransomware, what’s insane about it— especially what we were hit with—is that it was built to not only infiltrate our network, but also determine the types of PCs we had in the shop in order to do the most damage. It ran from one PC, hit a couple of devices that weren’t secure, and turned them into what they call “zombies,” which wreaked havoc across our facility. It originated in Redmond, and because our facilities are connected in Redmond and Tucson, it branched out and hit multiple PCs and infrastructure in our Tucson facility.
Because of the extent of how this software works and how advanced it was, we had to do a 50,000-foot view of shutting everything down and doing a complete rebuild. We couldn’t take what we had that was still working and reuse it. We had to reinstall operating systems and go the full length of a complete infrastructure rebuild. It did some serious damage. And it’s not necessarily something that can be controlled from a security perspective once it’s been let in-house; it was very difficult to root out where it came from.
With the nature of cybersecurity today, we had tools in place that allowed us to determine—from an intrusion detection perspective and traceability of what went outbound—that our data was compromised internally. We were able to even have a third party look at it, and they verified that as well. We had a third party review everything and found that nothing was compromised externally, which meant that while our data was affected, it wasn’t transferred out of our networks.
To read this entire interview, which appeared in the July 2020 issue of SMT007 Magazine, click here.
Suggested Items
Lockheed Martin Australia, The Department Of Defence Sign Strategic Partnership Head Contract
04/26/2024 | Lockheed MartinLockheed Martin Australia signed a landmark AUD$500 million contract with the Department of Defence to build Australia’s future Joint Air Battle Management System under project - AIR6500 Phase 1 (AIR6500-1).
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.