Limata Launches X1000 Direct Imaging System Platform

Reading time ( words)

Limata, a provider of Direct Imaging (DI) systems for PCB manufacturing and adjacent markets, introduces the X1000, a flexible cost-efficient system platform for dry-film patterning and solder mask imaging designed for PCB manufacturers with quick turnaround production configurations.

The X1000 can be configured as an affordable entry-level solution that provides PCB manufacturers with a modular and scalable system platform that can be quickly upgraded in-place within just a few hours. Manufacturers can thus start with a low-cost single-head machine and, as their volumes increase, seamlessly ramp up capacity to up to 3 heads with 18 simultaneously working laser diode sources.

The high-end model, the X1000HR achieves a resolution of 8 µm line and 12 µm space that meets the stringent demands of IC substrate and MSAP process production and makes fine line printing affordable for small series production.

Accuracy and reliability are key in high-precision PCB fabrication. A change in position or room climate can easily affect the accuracy of critical components, for example the power of the laser or position of the laser beams, and thus necessitate re-calibration and downtime. To address this issue, Limata has developed an integrated auto-calibration system that eliminates manual adjustments and resulting production downtimes.

Faster solder mask imaging
Like all X-series system platforms from Limata, the X1000 gives manufacturers cost-effective access to Limata’s innovative LUVIR® technology for rapid solder mask (SM) direct imaging. This reduces the Total Cost of Ownership (TCO) by up to 40% compared to competing systems. LUVIR, a proprietary technology of Limata, slashes existing ultra-violet (UV) power requirements that have made today's solder mask imaging slow and expensive. By utilizing both UV and infrared (IR) lasers, this technology significantly lowers UV power consumption, which reduces imaging cycle times and increases production throughput. LUVIR is compatible with all conventional solder mask ink types and colors, achieving best-in-class ionic contamination ('bleeding') values.

"With the X1000, we provide QTA PCB manufacturers easy and affordable access to the benefits of LUVIR," said Matthias Nagel, CTO of Limata. "These benefits include unmatched speed, high resolution and profitability in high-mix production runs."

The X1000 has the industry-wide smallest operational footprint enabling it to neatly fit into clean rooms and runs efficiently on single-phase power, making it a very compact, power-efficient unit.

Seamless automation
For high volume manufacturers wishing to streamline and update their manufacturing processes with automation features, the X1000A model enables a fully automated and integrated inline LDI system, which can be installed in a single or twin configuration.

In combination with LUVIR, the twin-set configuration X1000A-Twin delivers market-leading throughput of up to 180 exposures per hour on conventional solder mask inks such as Taiyo PSR-4000 BN or AM03TS.   

As a fully-integrated system from a single vendor, the X1000A adds seamless automation without the headaches of dealing with multipler suppliers.

The low starting price of the X1000 system platform removes the financial entry-barrier for quick-turn-around manufacturers wanting to transition from mask/film and to invest in a digital system solution for solder mask direct imaging.


Suggested Items

ICT Seminar 2023 Review: Energy, Thermals, and Assistive Technology

03/16/2023 | Pete Starkey, I-Connect007
Widely believed to be the traditional Centre of England, Meriden was a popular venue for a gathering of the UK printed circuit community this month. They braved the forecast of heavy snow for the Institute of Circuit Technology’s annual general meeting to learn about current developments and challenges in a thought-provoking technical seminar and to network with industry peers and contemporaries. Thankfully, the forecasted heavy snowfall did not reach Meriden until after the event; we only had a few flurries, although the weather caused considerable disruption elsewhere in the country.

Paige Fiet: Forging a New Path

03/15/2023 | Patty Goldman, I-Connect007
As a young industry professional, Paige Fiet, a process engineer at TTM Logan, sees mentorship as a formative component of her success in IPC. Alongside the support and guidance of her mentors, Paige has distinguished herself as an emerging leader who brings a fresh perspective to the many topics currently of interest to the industry.

IPC APEX EXPO 2023 Special Session: Advanced Packaging

03/13/2023 | Pete Starkey, I-Connect007
The IPC APEX EXPO Special Session on Advanced Packaging this year attracted enormous interest, with Conference Room 2 at capacity long before the session began. Even with lots of extra seats squeezed around the edges, the session was standing room only for the just-in-time arrivals. IPC Chief Technology Officer Matt Kelly opened proceedings by introducing a distinguished panel of experts: Jan Vardaman, president and founder of TechSearch International; Sam Salama, CEO of Hyperion Technology; Matt Neely, director of process engineering at TTM Technologies; and Jim Fuller, VP of engineering technology at Sanmina.

Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.