Simbeor 2021.01 Cuts Model-Building Time From Hours to Minutes


Reading time ( words)

Simberian has released Simbeor 2021.01, which provides a huge boost of productivity for SI engineers by substantially reducing interconnect model building time. The Simbeor 3DML solver is accelerated by 50-100x on most of PCB/packaging problems.

We tested our Frontal Accelerator first time on Wild River Technology’s CMP-28 and Infinera’s EvR-1 test platforms. Electromagnetic model building for microstrip launch on the CMP-28 took just seven minutes instead of 360 minutes (over 50x acceleration) and model for microstrip launch on EvR-1 took just four minutes instead of 290 minutes (over 70x acceleration). All of this is accomplished with exactly the same accuracy confirmed with the measurements. CMP-28 and EvR-1 Kits with the measured data are available on request.

The memory required to solve a problem with the 3DML solver is also reduced by about 4x. Together with the acceleration, this enables users to solve much larger problems in reasonable time, such as nine differential vias with stitching vias in BGA or connector breakout on a 24-layer board, and multilayered package-to-PCB transitions.

Optimization, building solution spaces with thousands of models for design exploration and machine learning—as well as automatic post-layout EM analysis—can be now done much faster in Simbeor 2021. Problems that required overnight runs are solved over a coffee break, and problems that were solved over lunch are now solved while you prepare your coffee. Simbeor 2021 is a breakthrough for Simberian and a game changer for SI engineers.

Accelerated 3DML solver is available with Simbeor Explore and Complete licenses in Simbeor THz, Simbeor Agent, as well as in Simbeor SDK (for scripting in C/Matlab/Python). More productivity improvement features will be released this fall as continuous deployment of Simbeor 2021 continues.

For more information, visit www.simberian.com or contact Simberian at info@simberian.com.


 

 

Share




Suggested Items

Barry Olney’s High-Speed Simulation Primer

04/09/2021 | I-Connect007 Editorial Team
The I-Connect007 editorial team recently spoke with Barry Olney of iCD about simulation. Barry, a columnist for Design007 Magazine, explains why simulation tools can have such a steep learning curve, and why many design engineers are still not using simulation on complex high-speed designs.

Managing Footprints With Integrated EDA Tools

02/23/2021 | Matt Walsh, Siemens Digital Industries Software
Electronics companies are always under great pressure to continually grow and innovate. In addition to navigating ever-accelerating design cycles, they must also address and overcome generational complexities associated with their products, the underlying components they use, and the human capital accountable for delivering on time and on budget. Electronics firms can ill afford the time and resource inefficiencies associated with manually correcting design errors, poor library data integrity, or other inconsistencies leading to missed deadlines or even costly re-spins.

Real Time with… AltiumLive 2020: Steven Sandler’s Simulation Keynote

10/12/2020 | Nolan Johnson, I-Connect007
Steven Sandler, managing director at Picotest, delivered a detailed and informative keynote at AltiumLive 2020 on worst-case fault simulation. Nolan Johnson details how Sandler's presentation detailed the fundamental tenets of worst-case simulation, illustrated with lots of technical examples and anecdotal stories.



Copyright © 2022 I-Connect007. All rights reserved.