-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Real Time with… AltiumLive Europe: If You Don’t Know How It’s Made, How Can You Possibly Design It?
October 26, 2020 | Pete Starkey, I-Connect007Estimated reading time: 4 minutes
Designers attending the AltiumLive Europe 2020 Virtual Summit had the opportunity to see at first-hand how circuit boards were made to help them make informed design-for-manufacturing decisions.
Listed by Michael Gasch as the largest PCB manufacturer in Europe—and certainly one of the most modern, specialising in flex-rigid circuits, embedding technology, and other high-tech solutions—Würth Electronik welcomed AltiumLive to its Niedernhall factory to take a virtual tour. And a team of experts was on hand to provide real-time answers to questions raised by participants—of which there were more than 400.
The session was moderated by Altium multimedia marketing manager Benjamin Kitzinger. Würth PCB specialist Andreas Schilpp led the tour, and his colleagues—Alexander Staudt, Bernt Schroder, and Klaus Schill-Mulack—made up the panel.
The virtual tour was conducted in 10-minute periods, separated by Q&A sessions, and participants were also encouraged to respond to an occasional on-line multiple-choice quiz. The question asked before the start was how many steps there were in producing a 10-layer multilayer in basic technology—click on a number and submit. The answer was 65, to the surprise of a few who clearly had no hands-on experience of PCB fabrication.
Andreas Schilpp set off on his tour, accompanied by a cameraperson. After showing examples of a variety of product types, he began the manufacturing sequence with the issue of inner layer materials, following them into the yellow safelight area for photoresist lamination and laser direct imaging, then developing, acid etching and resist stripping, bonding treatment, and automated optical inspection before lay-up and hot-press bonding.
There was a Q&A break, with questions about the number of employees (approximately 180, covering 24 hours over six days), whether single-image or panelised data was preferred (single-image so that material usage could be optimised by panelisation in-house), and registration systems (post-etch punch and pin lamination for small batch, or optical alignment, spot weld, and mass-lamination for series production).
And a second quiz: What was the smallest drill diameter used in production? The answer was 0.1 mm.
Back on the virtual tour, Schilpp visited the drill shop: X-ray tooling hole optimisation, robotic flash trimming, and edge dressing, and then drilling. For mechanical drilling, there was a choice of single-spindle modules or multi-spindle machines, with 300,000 rpm spindle speed capability—all with auto-loading facilities. Laser drilling was used for microvia HDI and flex-rigid work. The next process was through-hole metallisation before photoresist lamination for outer layer laser direct imaging, followed by copper and tin pattern plating, resist stripping, alkaline etching and tin stripping, spray coating solder mask, and laser direct imaging. He commented that solder mask application and imaging for certain jobs was by 3D printing.
Another Q&A break brought a question about the cost impact of smaller drilled vias, 0.2 mm versus 0.3 mm. The answer was about 10%. There was also a question about improvement in capability since the factory was rebuilt, re-equipped, and re-commissioned in 2016. They said, “The name’s the same, but everything else is new!”
Next, there was a query about the difference between acid and alkaline etching—acid for photoresist, and alkaline for tin resist. Was copper reclaimed? Yes, copper was recovered from etchant and sent for recycling. What data format was preferred? Würth received about 250 data sets per day and was equipped to accept any format—typically extended Gerber or ODB++; IPC 2581 was seen occasionally but was not expected to replace Gerber. What were the benefits of 3D printing of solder mask? All of the benefits associated with additive processing, and the technology was becoming more widely used.
The third quiz question was about the volume of rinse water used per day, with a choice of answers from 200–20,000 cubic metres. Opinions were widespread, but the actual volume was 2,000 cubic metres.
In the final part of the virtual tour, Schilpp visited the finishing department, where electroless nickel immersion gold was the normal choice for flex-rigid work. Controlled-depth routing was used to remove excess rigid material from the flexible areas of flex-rigid circuits, and through-routing was used to profile individual circuits, so they could be removed from the panel. A pico-laser was available for profiling flexible material. Finished circuits were washed and optically inspected, then electrically tested with flying-probe equipment. Samples were release-tested in the laboratory before final inspection and shipping.
A concluding Q&A session responded to queries about providing customers with manufacturing design rules, including whether electrical testing was carried out 100% as standard (yes), what alternative profiling methods were available (V-scoring, sawing), what extra steps were involved when controlled impedance was required (several, beginning with calculating the stackup), and whether laser drilling would replace mechanical drilling. In all, 120 questions were answered live before time ran out, and several more would subsequently be responded to by email.
The closing quiz question was to guess the approximate cost of a PCB manufacturing plant with a capacity of 400 square metres per day. Most participants underestimated the actual cost of US$175 million!
It was a most informative hour and a quarter! Thank you, Würth Electronik and AltiumLive Europe.
Suggested Items
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Empowering Electronics Assembly: Introducing ALPHA Innolot MXE Alloy
04/16/2024 | MacDermid Alpha Electronics SolutionsIn the rapidly evolving electronics industry, where innovation drives progress, MacDermid Alpha Electronics Solutions is committed to setting a new standard. Today, we are pleased to introduce ALPHA Innolot MXE, a revolutionary alloy meticulously engineered to address the critical needs of enhanced reliability and performance in modern electronic assemblies.
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.
Inkjet Solder Mask ‘Has Arrived’
04/10/2024 | Pete Starkey, I-Connect007I was delighted to be invited to attend an interactive webinar entitled “Solder Mask Coating Made Easy with Additive Manufacturing,” hosted by SUSS MicroTec Netherlands in Eindhoven. The webinar was introduced and moderated by André Bodegom, managing director at Adeon Technologies, and the speakers were Mariana Van Dam, senior product manager PCB imaging solutions at AGFA in Belgium; Ashley Steers, sales manager at Electra Polymers in the UK; and Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands.
TE Connectivity Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/09/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that TE Connectivity has finalized the purchase of a Pulsar solderability testing system.