-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Three Honored with FED’s PCB Design Award
November 5, 2020 | FEDEstimated reading time: 3 minutes
The Trade Association for Design, PCB and Electronics Manufacturing (FED) has awarded the PCB Design Award to three PCB designers for their outstanding achievements: Thomas Blasko (CiBOARD electronic), Georg Scheuermann (TQ-Systems) and Michael Matthes (WITTENSTEIN cyber motor) are this year's winners. The award, donated by the Fed, recognizes every two years the demanding and complex work of PCB designers, this year in the categories 3D/construction space, high wiring density and high transmission rates (HDI) as well as special creativity. Erika Reel, Fed Board Member Design and Jury Chairman, and Christoph Bornhorn, Fed Managing Director, presented the winners in their companies with the winning certificates.
The winners of the PCB Design Award 2020
Thomas Blasko from CiBOARD electronic came first in the 3-D/construction space category. This category focuses on the mechanical challenges that can only be solved with complex, rigid, rigid flex or flexible circuits. Blasko's project describes a system for laser scanner position measurement. The Rigidflex circuit board consists of nine individual function groups with a base area of 29mm diameter – with an integrated assembly as large as a 35mm film can. The printed circuit board is folded around a predetermined aluminium milling body. The transfer of the measurement data and the power supply is carried out via a single coax cable. The big challenge here was to meet the tough mechanics requirements by cleverly partitioning the individual functions such as sensors, connectors, FPGA controllers and power supply.
Georg Scheuermann from TQ-Systems prevailed in the category of high wiring density/high transmission rates (HDI). This category is about circuits with extremely high integration density or very high transmission rates. Scheuermann convinced the jury with its complex design, a computer-on-module with various high-speed interfaces and two memory blocks with 18 DDR4 memory chips each. In order to supply the memory and cores, currents up to 70 A must be taken into account at clock speeds of up to 2.2 GHz. The cleverly designed 18-layer multilayer with minimal number of compressions ensures high-speed requirements and optimal supply of processor and storage.
Michael Matthes from WITTENSTEIN cyber motor is the winner in the category of special creativity. In this category, "the slightly different solution" is awarded: a design that is particularly clever or elegantly solved, even independent of carrier materials. Matthes' design allows nanosatellites to be aligned in near-Earth orbit. Highly compact - on a square space the size of a cube sugar - the Reaction Wheel was designed specifically for the harsh space conditions. The square design makes space-saving integration possible and also offers maximum flexibility in the application. Michael Matthes has succeeded in meeting the high requirements in this category through an ingenious layer structure of a 6-layer rigid flex circuit board. His project results are now being put to the test: With the rocket launch in Baikonur, the built-in printed circuit board in the micro-satellite was shot 600 kilometers into space.
Renowned industry award for printed circuit board designers
With the PCB Design Award, the winners receive a valuable professional award. Since 2012, the Fed has been awarding the valuable professional prize every two years, which is considered a knighthood in the community of PCB designers. The aim of the award is to honor outstanding printed circuit board designers and to present their achievements to the public. This complex and demanding job is often not sufficiently appreciated in practice. A good designer must bring knowledge from many fields. It is the link between development and production and must translate the specifications of the schematic into a production-oriented design. Not only does he have to be at home in electrical and manufacturing technology, but he must also master the basics of materials science and keep an eye on countless standards and guidelines. The economic impact of its layout must also be taken into account.
A jury of seven experts evaluated the submitted designs according to technical requirements, feasibility and documentation. On the basis of 50 predetermined criteria, the applicants had to describe their design. "We are very pleased about the high level of submissions," concludes Erika Reel, Chairwoman of the jury, "overall, the work shows a high degree of creativity in planning and cleverness in implementation."
Suggested Items
SMTA’s Conducts First UHDI Symposium
03/29/2024 | Marcy LaRont, PCB007 MagazineSMTA’s first UHDI Symposium in Peoria, Arizona, on Tuesday, March 26 featured a standout full-day technical program with 11 separate presentations on what will be required for our companies to move to ultra HDI manufacturing. The event was the brainchild of Tara Dunn, SMTA director of training and education. It included a compelling and collaborative presentation by David Haboud of Altium, John Johnson of American Standards Circuits, and Chrys Shea of Shea Engineering, who had spent the past several weeks creating and building an appropriate SMT test board vehicle for UHDI, something that was passed around for all conference goers to see and touch.
PCBflow Helps Designers Choose Best Manufacturer for the Job
03/28/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
Elementary, Mr. Watson: Ensuring Design Integrity
03/28/2024 | John Watson -- Column: Elementary, Mr. WatsonBack in February, many of us watched the "Big Game." It reminded me of the saying, “It's not how you start that is important, but rather how you finish." It is perfectly okay when you are talking about sports, you get off to a bad first half and need to recover in the second half. However, when it comes to PCB design, this is not a good practice. If things start badly, they usually don't recover. They continue down that same path, costing more money and losing design time.
Arrow Electronics Launches Intelligent Vision Ecosystem
03/27/2024 | BUSINESS WIREArrow Electronics, Inc. is utilizing the onsemi Imager Access System (IAS) module standard for developing intelligent vision solutions for use in robotics, machine vision, commercial cameras and other uses.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.