Vidatronic Achieves up to 10X Speedup Using Cadence Spectre X Simulator
November 17, 2020 | Cadence Design Systems, Inc.Estimated reading time: 1 minute
Cadence Design Systems, Inc. announced that Vidatronic, Inc. has successfully used the Cadence® Spectre® X Simulator to achieve leading electromigration and IR drop (EM-IR) reliability analysis on leading-edge 7nm and 5nm analog IP designs for mobile, hyperscale and other consumer electronics. With the Spectre X Simulator, Vidatronic achieved up to 10X speedup and a 3X reduction in memory consumption versus the previous-generation Spectre simulator.
Vidatronic licenses analog intellectual property (IP) designs, including power management unit (PMU), wireless charger, and LED lighting solutions for integration into customers' systems on chip (SoCs) in advanced-process nodes from 180nm down to 5nm.
The Spectre X Simulator enabled the Vidatronic team to test the reliability of their IP within larger blocks, ensuring accurate design measurements. Prior to deploying the Spectre X Simulator, Vidatronic’s design simulation took days, and after, the team was able to complete simulation within hours. The Spectre X simulation flow was straightforward, and there was virtually no learning curve for the designers because the team had previous experience with the legacy Spectre simulator. With one project in particular, the Vidatronic engineering team completed a design simulation with two million nodes, 1.6 million capacitors and 4.04 million resistors in a matter of hours.
“The Spectre X Simulator helped us reach our overall verification goals of improved simulation performance and capacity,” said John Tabler, Principal Member of Technical Staff at Vidatronic. “Cadence helped us deliver signoff accuracy on our 5nm IP design while drastically improving runtime, reducing verification time from days to hours, enabling us to get to market faster.”
Suggested Items
Altus Group Helps BitBox Unlock Productivity and Efficiency Gains with New Reflow Oven
04/22/2024 | Altus GroupAltus Group, a leading provider of capital equipment, has recently assisted BitBox, a UK-based electronics design, engineering and manufacturing company in upgrading its operations with the implementation of a new reflow oven from Heller Industries.
Real Time with... IPC APEX EXPO 2024: Exploring IPC's PCB Design Courses with Kris Moyer
04/18/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and IPC instructor Kris Moyer discuss IPC's PCB design training and education offerings. They delve into course topics such as design fundamentals, mil/aero, rigid-flex, RF design, and advanced design concepts. They also highlight material selection for high-speed design, thermal management, and dissipation techniques. The interview wraps up with details about how to access these courses online.
Cadence Unveils Palladium Z3 and Protium X3 Systems
04/18/2024 | Cadence Design SystemsThe Palladium Z3 and Protium X3 systems offer increased capacity, and scale from job sizes of 16 million gates up to 48 billion gates, so the largest SoCs can be tested as a whole rather than just partial models, ensuring proper functionality and performance.
Signal Integrity Expert Donald Telian to Teach 'Signal Integrity, In Practice' Masterclass Globally
04/17/2024 | PRLOGDonald Telian and The EEcosystem announce the global tour of "Signal Integrity, In Practice," a groundbreaking LIVE masterclass designed to equip hardware engineers with essential skills for solving Signal Integrity (SI) challenges in today's fast-paced technological landscape.
On the Line With... Podcast Talks With Cadence Expert on Manufacturing
04/18/2024 | I-Connect007In “PCB 3.0: A New Design Methodology: Manufacturing” Patrick Davis returns to the podcast to talk about design rules. As design considerations become more and more complex, so, too, do the rulesets designers must abide by.