Swissbit Announces Long-term Availability for SD, CompactFlash Cards S-250 and C-350
November 24, 2020 | SwissbitEstimated reading time: 2 minutes
Swissbit announces that it has extended the availability of its SLC-based SD memory cards, microSD memory cards and CompactFlash™ cards. The new product series S-250(u) and C-350 deploy the same product architecture as the previous S-200(u) and C-300 products. The new models replace these industrial memory products, which were introduced in 2008, and extend their availability well beyond 2027. Since the new products feature identical interfaces, controllers and NAND flash technologies, qualification of the new series can be carried out without risk and with minimal effort. This facilitates continued use in embedded control units that have already been in operation for a long time in automation, rail and avionics systems.
With the new S-250(u) and C-350 cards, Swissbit has extended the long-term availability of its robust and durable storage media to a total of almost 20 years. While NAND flash products usually have a short availability due to relatively rapid innovation cycles, Swissbit meets the critical requirements of industrial embedded systems with long life cycles through these special products. The S?250-SD and S-250u-microSD memory cards are SLC-based memory products that comply with the SD standard and support the SPI mode. The capacities range from 512MB to 2GB. The cards are specified for an industrial temperature range of -40°C to +85°C, offer a long operational life with data retention of up to ten years, and feature a robust design with an increased gold layer on the contacts. The cards are manufactured in Swissbit’s own factory in Berlin, Germany using a chip-on-board process.
New memory for legacy systems
The C-350 CompactFlash cards are available in capacities from 32MB to 256MB and support the same temperature range and functions. Historically, the CompactFlash form factor was the preferred solution for demanding industrial applications requiring easy replacement and reliable protection when used in harsh environments. Although the industry has since migrated to more modern form factors such as SD and CFast for new developments, Swissbit remains committed to supplying proven memory cards formats with long-term availability.
Industrial applications: more than just extended temperature ranges
Robust and durable memory products are predominantly used in applications that have long life cycles. Here, long-term availability is a primary requirement. “Swissbit addresses industrial applications in two different ways,” explains Roger Griesemer, General Manager Memory Solutions at Swissbit AG. “On the one hand, we support the demand for state-of-the-art technology with large capacities and high performance at low total cost. On the other hand, we know that there are many legacy systems that still need support and will remain in the field for another decade. Swissbit serves both markets with passion, commitment and the optimum products.”
Suggested Items
Saab Launches New Initiative to Shape the Future of Defense and Security
04/24/2024 | SaabSaab announces the launch of Skapa by Saab, a new initiative to accelerate the development and deployment of cutting-edge technologies and solutions.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).
AI Demand Drives Rapid Growth in QLC Enterprise SSD Shipments for 2024
04/23/2024 | TrendForceNorth American customers are increasing their orders for storage products as energy efficiency becomes a key priority for AI inference servers. This, in turn, is driving up demand for QLC enterprise SSDs.
Septentrio Expands UAV Ecosystem for Reliable GNSS Positioning
04/22/2024 | SeptentrioSeptentrio, a leader in high-precision GNSS* positioning solutions, is closely working with several major drone solutions providers including 3DR, Holybro, ARK Electronics and Systork, which is resulting in various new products that allow easier prototyping or integration of the mosaic™ GNSS receiver into UAVs.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.