Ventec to Host Live Webinar on Thermal Management with IMS


Reading time ( words)

Ventec International Group Co., Ltd. (6672 TT) is pleased to announce that it will be hosting a live webinar on ‘Top design techniques for thermal management with IMS’ on Thursday, June 23 at 3:00 p.m. CET / 9:00 a.m. EST. Presented by IMS technology expert Robert Art, the webinar is geared towards helping PCB Designers, OEMs and PCB Manufacturers optimize the thermal performance, reliability, and quality of their designs with high-performance IMS materials. 

Insulated metal substrate (IMS) technology provides an elegant and economical solution for managing component temperatures in electronic applications such as computing, lighting, and power supplies for a wide range of markets and environments. Identifying a suitable IMS to maintain components at a desired operating temperature enables engineers to design products that enjoy several advantages in the marketplace:

  • Superior reliability
  • Smaller size
  • Attractive appearance
  • Competitive price

Ventec’s free webinar on thermal management with IMS will review popular applications, provide top tips and best practices on IMS material selection and the options that are available to help designers and engineers overcome thermal-management challenges and achieve the thermal performance needed to achieve their targets.

Date: Thursday, 23rd June 2022
Time: 3:00 p.m. (CET) / 9:00 a.m. (EST)
To register, click here.

For more information about Ventec's solutions and the company’s wide variety of products, please visit www.venteclaminates.com.

Share




Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

06/17/2022 | Andy Shaughnessy, Design007 Magazine
We’re still not officially into summer yet, but Atlanta is bringing the heat, baby! It’s hit 97 degrees a few times this week, and I now have a fan aimed right at my face. At least it’s nice and humid too. I’m glad I don’t wear make-up. And it’s been a hot week in the circuit board community. This week, Eltek reported a fire at a board shop in Israel, and Flex committed to building a 145,000-square-foor facility in Jalisco, Mexico to serve the electric and autonomous vehicle segment.

Additive Manufacturing Requires Additive Design Techniques

05/09/2022 | Luca Gautero, SUSS MicroTec
Although I am not a designer by trade, I want to share my thoughts on what additive manufacturing means for designers, especially how it relates to solder mask. In this article, you will learn what topics I feel are the most important to address.

Additive Design: Same Steps, Different Order

04/12/2022 | I-Connect007 Editorial Team
We recently spoke with Dave Torp, CEO of Winonics, about the company’s additive and semi-additive processes and what PCB designers need to know if they’re considering designing boards with these new technologies. As Dave explains, additive design is not much different from traditional design, but the steps in the design cycle are out of order, and additive designers must communicate with their fabricators because so much of the new processes are still proprietary.



Copyright © 2022 I-Connect007. All rights reserved.