Prototron Circuits Upgrades Capabilities with Two PHI Lamination Presses

Reading time ( words)

Dave Ryder, President of Prototron Circuits of Tucson, Arizona, announced that his company has increased their lamination capabilities by adding two PHI 4 Opening Lamination Presses, one of which is a vacuum press with cool down capability.

“Adding these lamination capabilities will greatly improve registration and help to reliably handle the increase in the higher layer count business that we have experienced over the past several months. This is an important element in the progress we are making to completely upgrade our facility by the end of Q2 of this year,” said Mr. Ryder when making the upgrade announcement. 

About Prototron:

In business for 35 years, Prototron Circuits is one of the industry leaders when it comes to High Technology Quick Turn Printed Circuits boards. They are an AS9100 and Mil-PRF-31032 fully qualified fabricator with outstanding performance (98%+ Quality and Delivery). Prototron is the preferred source for all companies needing reliable QTA PCBs. They also offer a complete global sourcing solution in Taiwan making them one of the most versatile and capable PCB fabricators in North America.

Prototron’s high tech quick turn facility is in Tucson, Arizona. For more information go to


Suggested Items

EIPC Summer Conference 2022: Day 2 Review

06/29/2022 | Pete Starkey, I-Connect007
Örebro, Sweden on June 15 brought a bright and early start to Day 2 of the EIPC Summer Conference for those who had enjoyed the previous evening’s networking dinner, but had resisted the temptation to over-indulge or to carry on their long-awaited catch-up conversations with old friends into the small hours. All but a few were in their seats for 9 a.m., awake and attentive for Session 4 of the conference, on the theme of new process technologies, moderated by Martyn Gaudion, CEO of Polar Instruments.

I-Connect007 Editor’s Picks: Five Must-Reads for the Week

06/10/2022 | Nolan Johnson, I-Connect007
PCB fabrication is back in the news this week and posting high readership numbers as well. Among the most-read news, we see industry leaders changing roles, capital equipment shipment milestones, operational cost efficiencies, and, last but not least, cybersecurity.

Candor Nails the ROI With InduBond

06/07/2022 | Nolan Johnson, I-Connect007
Nolan Johnson follows up on his original interview with Sunny Patel, engineering manager at Candor Industries, about the economics of this new InduBond X-Press 360 lamination press. It sounds like Sunny has hit the “easy” button with the installation of this machine. Capabilities and energy use are two things that are significantly better, but has there been a positive impact on throughput? Sunny explains.

Copyright © 2022 I-Connect007. All rights reserved.