-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Master the Art of Communication With Manufacturers
June 30, 2022 | Kyle Burk, KBJ EngineeringEstimated reading time: 2 minutes
Design with manufacturing (DWM) emphasizes the important aspect of the true intent of design for manufacturing (DFM). The intent of DFM is to consider the manufacturing process during the entire printed circuit design process starting at the earliest stages of the design cycle, when the project first begins, and continuing to the end of the product lifecycle.
As mentioned in the May issue of Design007 Magazine, design is performed, at times, in a vacuum. But it doesn’t have to be that way. Whenever circumstances allow, design should be performed by communicating with all stakeholders throughout the design process, hence the emphasis on the word with in DWM. Communication can occur through personal correspondence such as email and voice conversations or through more formal design meetings—in person or through videoconferencing. No matter which means of communication you prefer, it’s important to communicate early and often with stakeholders involved in the downstream processes as you bring your project to realization.
There’s No ‘I’ in Team
Unlike the word “team,” there is an “I” in design with manufacturing, but that doesn’t make it a singular process. Rather, DWM requires involvement of a cross-functional team with the designer as the key stakeholder who communicates regularly with the team throughout the design process. This communication includes receiving feedback early from other stakeholders and implementing any improvements they suggest.
The higher-level structure of DWM takes effort but yields superior results because it helps the designer avoid delays while lowering manufacturing costs and maintaining a high-quality finished product. For example, deadlines are more likely to be met by communicating early with the assembly team on bill of materials component availability. For those designers using revision control, communicating early can help avoid the costly process of rolling a revision for minor last-minute design changes. Communicating with the fabrication team before beginning assembly can help lower manufacturing costs and turn times by discovering cost reduction opportunities, such as combining similar drill sizes.
DWM seeks to unify all stakeholders of the circuit board design and development process, including the designer, fabricator, and assembler. For components with specific requirements, DWM may also include involving the component manufacturer. The final complete data package sent to the assembler includes drawings, specifications, requirements, ratings, a bill of materials, Gerber, and drill data, etc.
DWM thus requires contributions and feedback from members of the team most familiar with the different documents of the data package. The designer should review preliminary Gerber and drill data with the fabricator to ensure the design is manufacturable. They should also discuss the bill of materials with the assembler to make certain that all components are available for purchase. Each document of the data package should be reviewed by an expert in the corresponding process.
To read this entire article, which appeared in the June 2022 issue of Design007 Magazine, click here.
Suggested Items
SEMI Applauds U.S. Chips Act Award for Samsung Electronics Facilities to Strengthen Domestic Semiconductor Supply Chain
04/17/2024 | SEMISEMI, the industry association serving the global electronics design and manufacturing supply chain, applauded the United States Department of Commerce’s announcement of a Preliminary Memorandum of Terms for an award under the CHIPS and Science Act to support the expansion of Samsung Electronics’ presence in Texas and the company’s development and production of leading-edge chips.
Ark Electronics Expands Global Manufacturing Factory Network in North America and Europe
04/17/2024 | PRNewswireElectronic Manufacturing Company Ark Electronics recently announced the expansion of its Global Factory Network with the addition of Electronics Manufacturing Service (EMS) capabilities in Mexico and Europe.
SIA Applauds CHIPS Act Incentives for Samsung Manufacturing Projects in Texas
04/16/2024 | SIAThe Semiconductor Industry Association (SIA) released the following statement from SIA President and CEO John Neuffer applauding semiconductor manufacturing incentives announced by the U.S. Department of Commerce and Samsung.
Report Reveals ‘True Impact’ of Manufacturing is Nearly a Quarter of UK GDP
04/15/2024 | Manufacturing Technologies AssociationManufacturing is having a far greater impact on the UK economy than first thought according to a major new report released today.
Design Community Town Hall Review
04/11/2024 | Kelly Dack, CID+, EPTACThe Design Community Town Hall took place on the afternoon of April 10, 2024. I was fortunate to attend this event, which marked an opportunity for members of some newly found design groups to get together and exchange ideas. Peter Tranitz, senior director of solutions for IPC, opened the session with a slide presentation introducing these new groups and members within the solutions department.