Aismalibar to Exhibit at electronica 2022

Reading time ( words)

Aismalibar will exhibit at electronica 2022 November 15–18, 2022 in Munich, Germany. electronica is the world's leading trade fair and conference for electronics. Aismalibar will be presenting new cooling technologies for power electronics, specifically Thermal Interface Materials (TIMs) and “Thermal FR4” replacing “standard FR4” in Multilayers to reduce temperature of the electronic components on PCB.

Electronic developments increasingly require improved thermal dissipation and maintenance of good dielectric strength. Thermal management becomes more challenging on new PCB's design needs. At Aismalibar, we have been developing industry leading solutions to enhance the overall thermal performance of your electronic circuits.

The constant trend in electronic modules “More Power out of Shrinking Space” is massively increasing the heat generated by the electronic components used in the various Power Module applications. To ensure the specified Power Module performance over lifetime requires an intelligent heat management throughout the whole cooling chain of the Power Modules.

Aismalibar Thermal Interface Materials have been designed to improve dielectric isolation and fast thermal transmission in – for example – new high voltage battery systems (mobile and stationary), and electronic power modules, taking into consideration cost reduction, lifetime performance, safety, reliability, and recyclability.

Our Thermal Interface Materials are divided into two main areas, differentiated based on whether they need dielectric capacity. Dielectric requirement is determined by the electronic device, its operating voltage, and the applicable regulations regarding ground insulation. Additionally, Aismalibar has developed a series of applicable surfaces on the TIMs, differentiated by either focus on optimizing Thermal Resistance (Rth) or to ease the use in users’ production by self-adhesiveness of the TIM. Aismalibar’s coatings can eliminate the use of thermal paste to reduce the air cavities, that exist between the surfaces of the TIMs and the heatsinks or electronic components. 

COPPERFILLER and BOND SHEET CURED offer a high-performance alternative solution to current thermal pastes or pads. The new COBRITHERM ALP is made from an aluminum base that is dielectrically insulated, designed to build structures, covers, partitions or radiators, among other solutions. It is completely insulated and guarantees excellent contact between the battery and dissipation elements.

Visit us in Hall B1, Booth 543 to learn more. Our team will be pleased to meet with you and provide more information about our products.



Suggested Items

Market and Tech Convergence: Electrically Conductive Inks

10/17/2022 | Stan Farnsworth, NovaCentrix
It’s no secret that electronics products are being asked to do more, pushing the boundaries of technological capabilities. Next-gen consumer products like flexible wearables and foldable mobile devices are proving themselves to be more than a fad, with start-ups and major companies alike booming on the market for the past few years.

Flexible Hybrid Electronics Design: Reducing Time to Market

03/23/2022 | Sean Nachnani, NextFlex
Emerging innovations in the flexible hybrid electronics (FHE) domain are enabling new applications across multiple industries due to their highly flexible structures and additive manufacturing processes. The smaller form factor, lighter weight, and conformal capabilities are ideal for IoT edge devices in health and fitness monitoring, military asset identification and tracking, automotive displays and sensors, aerospace radar, and soft robotics. Significant industry research led by NextFlex is optimizing the processes from design through manufacture for FHE products.

Just Ask Tara Dunn: What’s Next for LCP Materials?

11/05/2020 | I-Connect007 Editorial Team
First, we asked you to send in your questions for Happy Holden, Joe Fjelstad, John Mitchell, and others in our “Just Ask” series. Now, it’s Omni PCB President Tara Dunn’s turn! A regular Flex007 columnist, Tara discusses flexible circuits, rigid-flex, and rigid PCBs, as well as RF/microwave technology, microelectronics, and additive processes. Tara is the co-founder of Geek-a-Palooza and a show manager for the SMTA Additive Electronics TechXchange event. She has over 20 years of experience in the PCB industry. We hope you enjoy “Just Ask Tara.”

Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.