Boeing Demonstrates New Autonomous Anti-Jam Capabilities for U.S. Space Force Satellite Communications Program
November 15, 2022 | BoeingEstimated reading time: 2 minutes
Boeing engineers recently demonstrated a new, autonomous technology that can successfully prevent jamming attempts on U.S. Department of Defense satellite communications (SATCOM). The test was conducted on the U.S. Space Force’s Protected Tactical SATCOM Prototype (PTS-P), showing how this technology can provide secure communication in contested environments.
“Maintaining communication with our deployed forces during hostility gives us a tactical edge on the battlefield,” said Justin Bruner, PTS-P Program Manager at the U.S. Space Force. “Our adversaries are always attempting to deny our ability to communicate. On-board, autonomous, real-time nulling of jammers greatly enhances our resiliency, ensuring the United States and our allies can provide our warfighters with secure, reliable communications in a contested environment. Boeing has made significant strides in the development and execution of a nulling algorithm with flight-like firmware, demonstrating agile anti-jam capability. PTS-P and all of our Protected Anti-Jam Tactical SATCOM (PATS) programs are critical to this effort.”
PTS-P will provide space-based processing of the Protected Tactical Waveform (PTW), the U.S. military’s jam-resistant waveform. Boeing’s solution uses software-defined beam-shaping to geolocate and actively suppress jamming in real-time, with thousands of data points gathered every second.
The hardware-software integration demonstration featured a number of simulations where an adversary attempted to block a user’s communication, including situations with numerous simultaneous jamming attempts. In every simulation, the Boeing-built prototype autonomously mitigated highly-dynamic jamming attempts and preserved connectivity, including situations where the user was in close proximity to the interference source.
The U.S. Space Force has dubbed PTS-P a “pacesetter program” to signify the rapid prototyping approach and quick delivery timeline under the Space Enterprise Consortium’s (SpEC) OTA contracting mechanism. Additional PTS-P hardware and software demonstrations are planned in the coming months, with host vehicle integration set to begin early next year.
“The Space Force understands these rapid prototyping programs are needed to maintain technical and space superiority,” said Troy Dawson, vice president, Government Satellite Solutions at Boeing Defense, Space & Security.
“We are innovating to meet the needs of the evolving threat. This requires us to try things that we’ve never tried before, moving quickly, failing quickly, and ultimately fielding first-of-its-kind technology that is ready for the rigors of the battlefield. Our efforts on PTS-P are setting the pace, and blazing a trail that I anticipate many more national security programs will follow.”
Boeing’s PTS-P solution is scalable and hostable on both commercial or government space vehicles. The team has completed several hardware and software demonstrations, working towards a 2024 launch and ensuing on-orbit demonstrations.
Suggested Items
Boeing Opens Research & Technology Center in Japan
04/23/2024 | BoeingBoeing today opened a Boeing Research & Technology (BR&T) Center in Japan that will focus on innovation to enable the commercial aviation industry meet its goal of net zero carbon emissions by 2050.
Schweizer Electronic Appoints Thomas Gottwald as New Member of the Executive Board
04/23/2024 | Schweizer Electronic AGThe Supervisory Board of Schweizer Electronic AG has appointed Mr. Thomas Gottwald to the Executive Board as CTO (Chief Technology Officer) for a period of 3 years with effect from 1 May 2024.
US Department of Defense Selects Intel Foundry for Phase Three of RAMP-C
04/23/2024 | IntelThe U.S. Department of Defense (DoD) has awarded Intel Foundry Phase Three of its Rapid Assured Microelectronics Prototypes - Commercial (RAMP-C) program.
Real Time with... IPC APEX EXPO 2024: Industrial Quality Solutions from Zeiss
04/23/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Herminso Gomez of Zeiss Group discuss the company's industrial quality solutions, with a focus on X-ray technology. Zeiss provides a range of microscopy options and Herminso highlights the advantages of X-ray technology for aerospace, medical, and consumer electronics sectors.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.