-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Everyone Wants Change: Who Wants to Lead the Way?
January 25, 2023 | Nolan Johnson, I-Connect007Estimated reading time: 3 minutes
Nolan Johnson recently met with Alun Morgan, technology ambassador at Ventec, and Ventec COO Mark Goodwin to discusses the industry’s determination to cling to outdated processes and standards, and some potential consequences. To maintain efficiency and keep pace with the market’s newest entries in Asia, Alun and Mark believe that legacy companies in the West must be open to challenging conversations that will require questioning old practices and revising those practices toward sustainability.
As Alun points out, everyone says they want change, but no one wants to lead the way.
Nolan Johnson: Would you say that there’s an opportunity for innovation right now? Your options are to either stay inside old niches with low margins, or to start looking for new ways to do things. In another conversation, for example, you alluded to thermal management coatings as potential replacements for heat sinks. What other ways can you see this done differently?
Mark Goodwin: I don’t have a clear answer to that, but I think we will start seeing management of scarce resources enter the supply chain discussion. People need to consider what they truly need for the performance they’re looking for; there is no doubt in my mind there’s a huge amount of unnecessary over-engineering happening. For example, you must start considering the scope for using a half-ounce copper foil when you’re currently using one ounce, or one ounce where you’re using two-ounce—those are the shifts in scope we need to be anticipating.
Alun Morgan: That’s right. This is an opportunity to return to the point we’ve made before. It’s critical to understand the end use. You need a clear understanding of both what the customers need and what they really want, then you need to link it all together. Mark, you and I have spent our careers with companies who often don’t share information with us, which makes it impossible to offer them anything substantial; on the other hand, when companies share information with us, we can get them access to a fantastic supply chain offering.
Goodwin: Yes, and we’ve done lots of business over many years. By way of example, let’s talk about an issue that’s been a bugbear of ours for years. Why is laminate 1.6 mm thick? It’s a waste of glass fabric and of resin. In the old days, it had to be 1.6 mm because it needed to fit into an edge connector. When was the last time you saw an edge connector? Why is it still 1.6 mm thick? A double-sided plated through-hole board of 1.0 mm is rigid enough to support the components. Why not take out two, three, even four pieces of glass fabric?
Morgan: It comes to the need. What is the requirement? The user doesn’t always know what he needs or what he can get away with. He just says, “Well, it’s always been that way.” You see this mindset all the time in so many different industries. The first step in designing a solution for someone is understanding what they need. Don’t ask them what they need—most of the time, they don’t know. They really don’t, so you must ask the right questions.
My son’s involved in UX—user experience—and so much of that is relevant here. He walks through that process with users. He calls it a “design safari”—pretend you’re going on a safari where you must stop at each new thing, think it through, and ask, “Why do we do that?” Until you’ve done that, you don’t know what the customer needs, and they don’t know either. You must go through each stage. Once you’ve identified the real need, you can develop an efficient method to deliver that need.
We’ve seen so much waste in pursuing this, haven’t we, Mark? On a few occasions, we’ve nailed it down and saved huge amounts of resources. If you can get everyone to be open and have that discussion, get them to genuinely share with you, you can make big gains.
Goodwin: There must be a willingness and openness to move forward, but all too often we’ve discovered there are too many closed minds in this business.
To read this entire conversation, which appeared in the January 2023 issue of Design007, click here.
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.