IMPACT 2014 - IPC on Capitol Hill


Reading time ( words)

Author's Note: The views expressed in the following recap of the IPC IMPACT 2014 event held June 10-11 are solely my own. In keeping with IPC’s long-standing commitment to open dialogue by and between its members, no direct quotes or personal views from any IPC members are referenced in this article.

Although I am a Washington, D.C. native and reside in the D.C. suburbs, I must admit it was difficult not to get excited in advance about spending two days in downtown Washington on Capitol Hill at IMPACT 2014, talking circuit boards with both politicians and my industry peers alike!

As an industry, we face many challenges and obstacles in our pathway to success and IPC’s IMPACT 2014 offered the opportunity to meet key members of Congress, policymakers and influencers, educate them about needed actions to strengthen the electronics sector and the overall economy and national security, and network with industry colleagues.

IPC delivered superbly on all accounts.

I last attended IPC Capitol Hill Day in 2011, and while that was an outstanding event as well, it was clear this time around that IPC had redoubled its commitment to public policy engagement. In January of this year, IPC’s Government Relations and Environmental Policy office moved from its former Arlington, Virginia, location into the heart of D.C. This prestigious Pennsylvania Avenue location is just blocks away from both the White House and Capitol Hill. No big surprise, as a government outreach and member advocacy presence here clearly pays dividends. This was reflected in the steady stream of high-level meetings with senators, representatives, and White House staffers that the IPC Government Relations team arranged for our IPC member delegation.

Read the full column here.


Editor's Note: This column originally appeared in the July 2014 issue of The PCB Magazine.

Share

Print


Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

07/31/2020 | Andy Shaughnessy, Design007 Magazine
Say what you will about 2020, but it certainly isn’t boring. There’s a lot going on in the PCB world, and there’s something for everyone in this week’s top five picks. And it’s all positive, despite the lingering presence of COVID-19 and its aftereffects.

Just Ask Happy: What Would You Change About the Industry?

07/28/2020 | I-Connect007 Editorial Team
We asked for you to send in your questions for Happy Holden, and you took us up on it! The questions you've posed run the gamut by covering technology, the worldwide fab market, and everything in between. What would you change about the industry?

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

07/24/2020 | Nolan Johnson, PCB007
This week’s top five is a smattering across the industry. There’s an update on an established vendor and a press release from a startup. Then, we have two columns: one on M&A, and the other on supply chain disruptions. Finally, I highlight an interview from a U.S. food distributor sales manager, shedding light on the similarities of supply chain interruption in all industries. It's quite an assortment, but what they all have in common is that readers found these items compelling.



Copyright © 2020 I-Connect007. All rights reserved.