IMPACT 2014 - IPC on Capitol Hill


Reading time ( words)

Author's Note: The views expressed in the following recap of the IPC IMPACT 2014 event held June 10-11 are solely my own. In keeping with IPC’s long-standing commitment to open dialogue by and between its members, no direct quotes or personal views from any IPC members are referenced in this article.

 

Although I am a Washington, D.C. native and reside in the D.C. suburbs, I must admit it was difficult not to get excited in advance about spending two days in downtown Washington on Capitol Hill at IMPACT 2014, talking circuit boards with both politicians and my industry peers alike!

As an industry, we face many challenges and obstacles in our pathway to success and IPC’s IMPACT 2014 offered the opportunity to meet key members of Congress, policymakers and influencers, educate them about needed actions to strengthen the electronics sector and the overall economy and national security, and network with industry colleagues.

IPC delivered superbly on all accounts.

I last attended IPC Capitol Hill Day in 2011, and while that was an outstanding event as well, it was clear this time around that IPC had redoubled its commitment to public policy engagement. In January of this year, IPC’s Government Relations and Environmental Policy office moved from its former Arlington, Virginia, location into the heart of D.C. This prestigious Pennsylvania Avenue location is just blocks away from both the White House and Capitol Hill. No big surprise, as a government outreach and member advocacy presence here clearly pays dividends. This was reflected in the steady stream of high-level meetings with senators, representatives, and White House staffers that the IPC Government Relations team arranged for our IPC member delegation.

Read the full column here.


Editor's Note: This column originally appeared in the July 2014 issue of The PCB Magazine.

Share


Suggested Items

Walt Custer’s Annual Update from productronica 2017

11/21/2017 | Patty Goldman, I-Connect007
Industry consultant Walt Custer of Custer Consulting sat down with me at productronica 2017 to once again inform our readers with his yearly update and perspective on what’s happening in the industry. And guess what? It’s good news! Pertinent charts referenced in our conversation are included, but if you want more, Walt invites you to click the link at the end of this conversation and email him directly.

The PCB Norsemen: Industry 4.0, AI and CircuitData

11/14/2017 | Andreas Lydersen, ELMATICA
As automation works its way onto the shop floors, it still struggles to replace humans in the supporting roles, such as designers, purchasers, brokers, and back-office staff. Where automation on the shop floor replaces humans in doing repetitive manual tasks, the supporting roles (at least some of them) require intelligence to understand and utilise information.

New I-Connect007 Team Members Tour American Standard Circuits

11/06/2017 | Kiersten Rohde and Jonathan Zinski, I-Connect007
Recently, Anaya Vardya, CEO of American Standard Circuits, invited two of I-Connect007’s newest team members, IT coordinator Jonathan Zinski and Editor Kiersten Rohde, to tour his facility in West Chicago, Illinois. Happy Holden, resident PCB expert, also joined the newbies on their field trip to ASC. In the following articles, Jonathan and Kiersten describe their experience touring ASC. Special thanks to Anaya for hosting the I-Connect007 team.




Copyright © 2017 I-Connect007. All rights reserved.