Indium and Gallium: Playing Important Roles in LED Lighting and the 2014 Nobel Prize in Physics


Reading time ( words)

Blog post by Dr. Ron Lasky, Indium Corporation, January 5, 2015


Folks,

An important element of US energy independence is the reduction of energy use for lighting. While, in its day, the incandescent light was one of the greatest inventions of all time, it is extremely energy inefficient. Studies show that 19% of all electricity is used for electric lighting. Up to 90% of the energy used to power incandescent lights actually produces heat not light. This additional heat can result in even more electricity use, as more air conditioning may be needed in warm climates to keep offices and homes cool.

led_light_bulb_w250.jpgLED lights are promising to make a significant contribution to solving this energy problem. They produce about 100 lumens per watt of electric energy as compared to incandescent light’s 15 lumens per watt. This advantage of over six times the energy efficiency is not the LED’s only strong point; they last for about 30,000 hours, 30 times incandescent light's 1,000 hours.

On the downside, LED lights are currently more expensive, and light from an LED is directional, so bulb design has been a challenge (which has been met quite well). As shown in Figure 1, Although the light for LED's is very directional, designs like this one replicate the omnidirectional light from a standard incandescent light. In addition, many consider LED's blue-white light to be somewhat harsh.

The price of LED lights is dropping fast and it is only a matter of time before LEDs can be purchased in a variety of color temperatures, creating more pleasing white light colors.  These issues of LED lighting have been discussed thoroughly.

No white light LED exists. To produce white light, red, green, and blue LEDs are often used together as shown in Figure 2. led_rgb-250.jpg

These single-colored LEDs incorporate indium and gallium in semiconductor materials such as aluminum gallium indium phosphide, indium gallium nitride, and other indium or gallium semiconductor compounds to produce their light.

Of the red, green, and blue light LEDs, the blue light LED was the greatest challenge to produce - many felt it might be impossible. Without the blue LED, creating efficient LED white light would be a challenge. However, by the early 1990s, work by Shuji Nakamura, Isamu Akasaki, and Hiroshi Amano enabled high efficiency blue light LEDs. For this work they were awarded the 2014 Noble Prize in Physics "for the invention of efficient blue light-emitting diodes, which has enabled bright and energy-saving white light sources."

So, as you watch the LED lighting revolution unfold, remember that gallium and indium play a crucial role in making your day a little brighter while also saving tremendous amounts of energy.

Cheers,

Dr. Ron

Share




Suggested Items

Dave Hillman on Living Your Passion

03/29/2022 | Barry Matties, I-Connect007
Barry Matties leads this engaging retrospective conversation with Dave Hillman, a Fellow, Materials and Process engineer at Collins Aerospace, who talks about mentorship, pandemic changes, and solder. “Soldering is soldering,” Dave says. “But how we do that keeps evolving in response to the new technologies and smaller packages.” What’s the key to his success and longevity? “Find your passion.” Here’s how he’s done it.

Doug Pauls, Collins Aerospace, Receives Dieter Bergman IPC Fellowship Award

03/16/2022 | Patty Goldman, I-Connect007
Doug Pauls holds a B.A. in chemistry and physics from Carthage College, Kenosha, Wisconsin, and a B.S. in electrical engineering from the University of Wisconsin, Madison. He worked nine years for the Navy, eight years as technical director of Contamination Studies Labs, and 19 years at Rockwell Collins (now Collins Aerospace), in the Advanced Operations Engineering group, where he is a principal materials and process engineer. Doug was awarded the Rockwell Collins Arthur A. Collins Engineer of the Year Award in 2004.

IPC’s Dieter Bergman Fellowship Award Presented to Bev Christian, HDPUG

03/14/2022 | Patty Goldman, I-Connect007
The Dieter Bergman IPC Fellowship Award is given to individuals who have fostered a collaborative spirit, made significant contributions to standards development, and have consistently demonstrated a commitment to global standardization efforts and the electronics industry. Bev Christian is a facilitator for the High Density Packaging User Group (HDPUG) and an adjunct associate professor in the Department of Mechanical and Mechatronics Engineering of the University of Waterloo, Waterloo, Ontario, Canada. In the past 31 years he has held positions at Nortel, BlackBerry, and CALCE; all in the areas of materials and failure analysis. Bev has never missed an IPC APEX EXPO since its inception. He is a member of 27 IPC committees and attends as time and the lack of clones allow.



Copyright © 2022 I-Connect007. All rights reserved.