Fast Cure Adhesives Now Available for Cartridge Dispensing

Reading time ( words)

fastcure_triggerbond.jpgEpoxies Etc. has added three new fast-cure epoxies to the range of adhesive products suitable for use with TriggerBond dispensing guns.

The TriggerBond system packages an adhesive’s two components into their own cartridges, which fit in a dual-barrel dispensing gun. Because the cartridges contain precise quantities of hardener and resin, TriggerBond produces the correct mix ratio every time you squeeze the trigger.

The three new TriggerBond epoxies are each formulated for a different setting time:

  • 10–3005 sets in 5 minutes.
  • 10–3020 sets in 20 minutes.
  • 10–3046 sets in 46 minutes.

With shear strength up to 1,500 psi and notched Izod impact of 2.7 ft-lb/in, all three epoxies offer high-bond and impact strengths for structural bonding performance.

All three epoxies cure at room temperature and work with a wide variety of metal, ceramic and polymer substrates in electronics, industrial and jewelry applications. They’re available in black or clear as well as in different consistencies—such as high viscosity and non-sag.

Evaluation samples for industrial applications are available here.

About Epoxies, Etc.

Epoxies, Etc., an ISO 9001:2008 registered company, is a leading formulator of specialty epoxies, urethanes, silicones, and UV curable systems. Our adhesives, potting and encapsulating compounds, and coatings are widely used in the electronic, electrical, construction, and decorative industries. We have thousands of existing epoxy, urethane, and silicone formulations, but specialize in creating custom formulations for your specific needs. Our hands-on approach and creative, experienced technical staff are paramount to ensuring your satisfaction, as we will work directly with you to determine the perfect product for your application.


Suggested Items

5 Simple Elements to Guarantee Outsourcing Success

11/09/2017 | Neil Sharp, JJS Manufacturing
Rather than viewing outsourcing as a way to offload unwanted tasks, OEMs should spend time carefully selecting and then maintaining a properly managed relationship with their chosen EMS partner. Here are five simple elements that you should focus on before, during and after an outsourcing strategy to guarantee it is a success.

Cleaning Trends: The Challenges of Miniaturization and Proximity

11/01/2017 | Patty Goldman, I-Connect007
At the recent SMTA International conference, I-Connect007 Managing Editor Patty Goldman caught up with Ram Wissel, VP of Global Technology at KYZEN, to talk about the latest cleaning challenges, and bringing Industry 4.0 into the world of cleaning in PCB assembly.

Should I Involve My EMS Partner in DFM?

10/26/2017 | Neil Sharp, JJS Manufacturing
OEMs are seeking the support of EMS providers with more than just manufacturing, but with design elements too. One of the main design services EMS providers will be likely to offer is design for manufacture (DFM). This article highlights why engaging your EMS partner in DFM is worthwhile, and will be valuable in securing the longevity of your product.

Copyright © 2017 I-Connect007. All rights reserved.