Isola Launches Low-loss Laminate for 100 GB Ethernet Apps


Reading time ( words)

I spent time at IPC APEX EXPO 2015 talking about Isola’s launch of a low-loss, low-skew laminate prepreg with Fred Hickman, senior director of high-speed digital products. Hickman explains that the new material, Chronon, will be one of the enablers of 100 GB Ethernet applications.

Pete Starkey: Fred, it’s great to meet you. As the senior director of high-speed digital products at Isola, you are the ideal person to tell us about the new product launch. The brand is Chronon and it's a low-loss, low-skew laminate prepreg. Could you just give me a short introduction to this material?

Fred Hickman: Thanks for coming by, Pete, and thank you for giving me a chance to introduce you and your readers to Chronon. Chronon is indeed a new low-loss material for us. Essentially, it's one of the enablers, we think anyway, for 100 GB Ethernet applications, with a combination of good DK, 3.64 DK, less than .004 loss, but also excellent for skew. Fiber weave affects skew so it is a skew mitigator. So what we're proposing for people who currently use other competitive materials on the market, this is a drop-in material with very similar electrical, but very much improved skew mitigation capabilities.

So we have this product, Chronon, and last year we also introduced Tachyon 100G. Both have lower insertion loss, but Tachyon does not have the same ability to mitigate skew as Chronon.

Starkey: Are you in a position to give me a brief explanation as to how you've gone about minimizing the skew? What is it about normal materials that causes skew and how can that be overcome?

Hickman: With most materials, when you change the resin content it has a very big impact on the DK of the material. For instance, our best skew mitigator is GigaSync, changing the resin content from 50% all the way up to 75% and you get about a 3% change in the DK. So if you have lines going across resin/glass it doesn't matter because the DK basically stays the same. With Chronon, the DK change is only about 9% and in that same range, but with most other materials the DK range is around 20%.

Starkey: Oh, I see.

Hickman: So essentially what we're doing is using a combination of spread glass, also some proprietary engineering techniques with which we're minimizing the weave effect of glass.

Starkey: I understand now. It’s really on a microscopic scale. Because there's such a difference in product and concept between glass and resin, if you've got a material where the signal has a glass-rich area and a resin-rich area, you can sort of smooth that out while still keeping the benefits of woven glass reinforcement, but having that reinforcement much more uniformly distributed through the substrate.

Hickman: Absolutely. You hit it right on the head.

Starkey: Well, Fred. Thanks very much indeed.

Hickman: Thank you, Pete. 

Share


Suggested Items

In Terms of Experience, a 10,000-foot View of China

01/17/2018 | Barry Matties, I-Connect007
In the past 30+ years of PCB manufacturing in China, you would be hard-pressed to find someone more connected to the pulse of the Asian market than Gene Weiner. Barry Matties met with the industry veteran at HKPCA to get his take on the show, the current and future market conditions of China, and any effect the new U.S. administration might have on trade relations going forward.

Weiner’s World—December 2017

01/02/2018 | Gene Weiner, Weiner International Inc.
Hold on to your seats! 2018 will be a year full of rapid changes, surprises, and growth. M&A activities will flourish. The supply chain will suffer shortages and changes as demand increases, copycats will rush to market, and new markets and potential suppliers will vanish before they are established.

AGFA: From Film to Inkjet Solder Mask

12/20/2017 | Patty Goldman, I-Connect007
The productronica show was indeed filled with new technology, and it was great to meet with people and learn about it. This is precisely how I met AGFA’s Frank Louwet, who filled me in on the Dipamat inkjet solder mask they have been developing. It seemed an odd choice to go from film to solder mask, but as Frank explained, it makes perfect sense.




Copyright © 2018 I-Connect007. All rights reserved.