Interesting Nanomaterial-based Electronic Inks from Intrinsiq


Reading time ( words)

Guest Editor Joe Fjelstad talks with Intrinsiq Material's CEO Sujatha Ramanujan about the various applications for their unique nano copper material. One application is as a paste for conductive via fill; another is to simply sinter the nano copper particles in an oven to create an ultra-thin copper foil. Or, a circuit pattern can be laser-sintered and the remaining washed off, to create printed electronics, even on paper.

Watch the interview here.

Share

Print


Suggested Items

Communication, Part 4: The Top 5 Causes of Engineering Delays

10/25/2019 | Steve Williams, The Right Approach Consulting LLC
In Part 4 of this series on how PCB fabricators and designers can better communicate, Bob Chandler from CA Design and Mark Thompson from Prototron Circuits address the top five causes of engineer delays.

Why Designers Need to Be at the SMTA Additive Electronics Conference

10/18/2019 | I-Connect007
In a recent interview, Kelly Dack and Tara Dunn (Omni PCB president and conference co-chair) discussed why designers need to attend the SMTA Additive Electronics Conference. Tara will also be attending and moderating a panel discussion at the conference.

Additive Electronics Conference Set for October 2019 Debut

10/15/2019 | Kelly Dack
Kelly Dack and Tara Dunn talk about the upcoming conference "Additive Electronics: PCB Scale to IC Scale" on October 24, 2019, hosted by SMTA in San Jose, California, and why it's an important event for people to attend—especially those involved in the design process.



Copyright © 2019 I-Connect007. All rights reserved.