IPC Validation Services 2014


Reading time ( words)

Guest Editor Judy Warner talks IPC's Director of Validation Services, Randy Cherry. Randy has been busy since launching IPC's Validation Services a year ago, with 16 QML audits completed and rapidly growing interest shown at this year's show. Randy also discusses future plans for auditing to IPC intellectual property standards 1071A and 1072, as well as to PCB standard 6012.

To watch the video, click here.

Share


Suggested Items

The IPC High-Reliability Forum for Mil-Aero and Automotive Sectors

09/24/2018 | Happy Holden, I-Connect007
I-Connec007’s Happy Holden had the pleasure of attending IPC’s High Reliability Forum (HRF) in Baltimore in May. As the IPC scripted it, it was a “Technical Conference with a Focus on Electronics Subjected to Harsh-Use Environments.”

PCBs Are Moisture-Sensitive Devices

09/07/2018 | Richard Heimsch, SUPER DRY
Research by SMT & Hybrid GmbH (now SMT Elektronik) was conducted just prior to the original publication of IPC-1601, which now provides detailed guidelines for the packaging and storage of PCBs, both from the PCB manufacturer and at the assembler’s manufacturing floor.

PCB Design, Fabrication and Use from the Mil-Aero End-User Perspective

08/28/2018 | Pete Starkey, I-Connect007
The procedures described for Rolls Royce were directly comparable with those described for MBDA, and the presenters were unanimous in re-emphasising the importance of working closely with their chosen PCB fabricators at all levels and all stages of design, qualification and production of their circuit boards.



Copyright © 2018 I-Connect007. All rights reserved.