Cicor White Paper Discusses Flexible Thin-Film Multilayer Substrates


Reading time ( words)

Ongoing development in electrical systems and circuits lead to increasing complexity and also increasing requirements in today’s thin-film substrates. Settled traditionally in between the semiconductor circuits and the standard PCB applications, thin-film substrates often provide an essential link between these two worlds.

In line with this, Cicor has released a new white paper, titled Flexible Thin-Film Multilayer Substrates, that discusses the general aspects of the fabrication of multilayer substrates and the possibilities which lie in the use of these. It also focuses on the application of thin-film based systems in the field of medical/life sciences applications.

Recent developments in Cicor’s thin-film processes allowed for the production of multi-layer substrates for various applications. Besides standard rigid thin-film substrates, carrying the metal and insulator stacks, also flexible multilayer applications are possible.

The nature of flexibility leads to the exquisite suitability for medical and biological applications, whereby the individual properties have to be adjusted to fit the specific application requirements. A major advantage in contrary to the PCB-based flexible multilayer substrates are the higher achievable resolution (smaller lines and spaces), as well as a wider spectrum of usable materials. Also the possibility of simple handling during surgery and biocompatibility, when used for medical implants, are some of the key requirements on such parts.

Different kind of products and prototyping was carried out by Reinhardt Microtech in the field of flexible multilayer substrates for medical use. Some applications hereby lie in the field of retinal implants which can be used for, at least partially, regaining sight for blind people. An example of such a system is combined of a low-power CMOS vision IC, which is operating with DC free supply, flexible multi-layer carrier substrate, and additional peripheral equipment.

All Cicor white papers are downloadable free of charge after completing a simple login process.

Click here to download the whitepapers

Share


Suggested Items

Designing with Ultra-Thin Flexible Printed Circuit Boards

07/04/2017 | Akber Roy, Rush PCB Inc.
Designing with flexible PCBs is not much different from doing the same with rigid boards, except that the designer must account for the mechanical complexity associated with flex circuits. For instance, a flexible PCB can tear if flexed beyond its capability during installation. Therefore, it is very important to create a mechanical model of the PCB and test it for a proper fit, before taking up the electrical design.

Growth Ahead for Flexible Hybrid Electronics Industry

05/25/2017 | Heidi Hoffman, SEMI
According to Zion Research, “global demand for the flexible electronics market was valued at $5.13B in 2015 and is expected to generate revenue of $16.5B by 2021, growing at a CAGR of slightly above 21% between 2016 and 2021.” Key elements of the market, in the view of most analysts, include flex displays, sensors, batteries, and memory.

Material Choices for High-Speed Flexible Circuits

04/27/2017 | G. Sidney Cox, COX CONSULTING
Materials to make high-speed flexible circuits are now available from many material suppliers. In deciding which materials to test or use, remember the tradeoffs the suppliers made in categories we discussed: electrical properties, mechanical/flex properties, and ease of processing. A choice should only be made after considering these options. Remember with any new materials it is very important to find fabricators that are knowledgeable about processing these new materials.



Copyright © 2018 I-Connect007. All rights reserved.