GOEPEL Launches Double-sided THT Inspection for PCBs


Reading time ( words)

GOEPEL electronics expands the configuration options for the AOI system THT-Line for double-sided inspection of THT assemblies. Besides the accumulating roller conveyor for work piece carriers now also tape transport is available, due to constantly increasing demand.

That allows, for instance, inspection of selective solder joints on assemblies which are transported without work piece carrier in the manufacturing process. Analogous to the accumulating roller, the tape transport can be used both for the actual manufacturing process in the upper area of the system as well as for the return transport in the lower area of the machine. In addition, a laser measuring system for the control of coplanarity (eg of connectors) or for height measurements on various components is available.

Up to two different and independently operating AOI modules can be integrated into a single system chassis of the THT-Line. This concerns, on the one hand, the inspection of THT components, which is typically carried out in the upper transport module before the wave soldering process. On the other hand, a completely self-sufficient operating second AOI module for THT solder joints can be used either in the lower return transport or in the upper transport system.  

The combination possibilities offer numerous ways to efficiently adapt the AOI system to the company-specific manufacturing process. A worthwhile example is installing the system prior to the wave soldering oven where the THT components are inspected before the soldering process. The bottom-side of the PCB with the solder joints is inspected during the return transport in the lower stored area of the same machine.

About GOEPEL electronic:

GOEPEL electronics is a worldwide leading vendor of innovative electronic and optical test and inspection systems, being the market leader for professional JTAG/Boundary Scan solutions for Embedded System Access (ESA). A network of branch offices, distributors and service partners ensures the global availability of the products as well as the support of the more than 8,000 system installations. Founded in 1991 and headquartered in Jena/Germany, GOEPEL electronics employs currently more than 215 employees and generated a revenue of 30 Million Euro in 2014 (ca. $32 Mio). GOEPEL electronics has continuously been ISO9001 certified since 1996 and has been honoured with TOP-JOB and TO

Share

Print


Suggested Items

Catching Up With Sean McConville, Niche Electronics

02/22/2021 | Dan Beaulieu, D.B. Management Group
Dan Beaulieu catches up with Sean McConville, vice president of business development at Niche Electronics, who shares his background in the industry, the strengths of his company, and how the pandemic has affected its business.

Meet Christine Davis, I-Connect007 Columnist

12/23/2020 | I-Connect007 Editorial Team
Meet Christine Davis, one of our newest columnists! Christine will share her expertise and lessons learned through her journey as one of the few women in the electronics industry to found and run her own company.

Lorain County Community College’s Successful MEMS Program

12/07/2020 | I-Connect007 Editorial Team
The I-Connect007 editorial team had the pleasure of an extended and detailed conversation with Johnny Vanderford and Courtney Tenhover from Lorain County Community College (LCCC). Vanderford and Tenhover are at the heart of the microelectromechanical systems (MEMS) program at LCCC that is emerging as a model for a successful technical higher-education program. This conversation was lively, and the enthusiasm at LCCC is infectious, as it should be; their results are impressive.



Copyright © 2021 I-Connect007. All rights reserved.