Researcher Develops Cheaper, Better LED Technology
August 28, 2015 | Florida State UniversityEstimated reading time: 2 minutes
A Florida State University engineering professor has developed a new highly efficient and low cost light emitting diode that could help spur more widespread adoption of the technology.
"It can potentially revolutionize lighting technology," said Assistant Professor of Industrial and Manufacturing Engineering Zhibin Yu. "In general, the cost of LED lighting has been a big concern thus far. Energy savings have not balanced out high costs. This could change that."
Yu developed this new LED technology using a combination of organic and inorganic materials. The material, which dissolve and can be applied like paint, shines a blue, green or red light and can be used to make a light bulb.
But what makes it really special is that it's far simpler to manufacture than existing products on the market.
Most LED materials require engineers to put four or five layers of material on top of each other to create the desired product or effect. Yu's material only requires one layer.
"In the future, to do manufacturing, it's a big challenge if you have to deal with multiple layers," he said.
His research has resulted in an award by the National Science Foundation to further investigate the essential materials and establish the processing platform for the development of intrinsically stretchable, active-matrix organic LED displays.
The discovery was reported in the journal Advanced Materials.
The research is crucial to the development of LED technology, which is fast becoming an avenue to reduce the country's electric consumption. LED lighting is already sold in stores, but widespread adoption has been slow because of the costs associated with the material and the quality.
But, LED lights do save energy.
According to the U.S. Department of Energy, residential LED lighting uses at least 75 percent less energy than regular incandescent lighting.
Yu came to FSU by way of the Energy and Materials Strategic Faculty Hiring Initiative. He is a researcher at the FSU's High-Performance Materials Institute (HPMI), a multidisciplinary research institute dedicated to the research and development of advanced materials and manufacturing technologies.
"HPMI has really benefitted from Dr. Yu's diligent work, as well as the other top researchers who have joined FSU as part of the Energy and Materials Strategic Hiring Initiative," said Richard Liang, director of the High-Performance Materials Institute.
Other authors on the journal article published in Advanced Materials were FSU post doctoral researcher Junqiang Li and graduate students Sri Ganesh Bade and Xin Shan.
Suggested Items
GlobalFoundries Commits to Achieving Net Zero Emissions and Carbon-Neutral Power by 2050
04/23/2024 | GlobalFoundriesGlobalFoundries (GF) is furthering its commitment to sustainable operations and fighting climate change with the announcement of two new long-term goals to achieve net-zero greenhouse gas (GHG) emissions and 100% carbon-neutral power by 2050.
ROHM Group Company SiCrystal and STMicroelectronics Expand Silicon Carbide Wafer Supply Agreement
04/23/2024 | ROHMROHM and STMicroelectronics, a global semiconductor leader serving customers across the spectrum of electronics applications, announced today the expansion of the existing multi-year, long-term 150mm silicon carbide (SiC) substrate wafers supply agreement with SiCrystal, a ROHM group company.
IDTechEx Report Unveils 3D Electronics Status and Opportunities
04/22/2024 | PRNewswire3D electronics is an emerging manufacturing approach that enables electronics to be integrated within or onto the surface of objects. 3D electronic manufacturing techniques empower new features, including mass customizability, greater integration, and improved sustainability in the electronics industry.
Altus Group Helps BitBox Unlock Productivity and Efficiency Gains with New Reflow Oven
04/22/2024 | Altus GroupAltus Group, a leading provider of capital equipment, has recently assisted BitBox, a UK-based electronics design, engineering and manufacturing company in upgrading its operations with the implementation of a new reflow oven from Heller Industries.
Growth Potential: Electronics Manufacturing Driving Massive Surge in Manufacturing Investment
04/22/2024 | Shawn DuBravac, IPCIn the early months of the pandemic, investment in manufacturing infrastructure, such as plants and production facilities, declined sharply. Real investment dropped over 11%, before finally recovering to pre-pandemic levels in the first half of 2022. Over the past two years, however, several factors have combined to drive manufacturing investment to record levels.