ZESTRON's Umut Tosun to Present at SMTA International 2015


Reading time ( words)

ZESTRON, the globally leading provider of high precision cleaning products, services and training solutions in the electronics manufacturing and semiconductor industries, is pleased to announce that Umut Tosun, M.S.Ch.E., Application Technology Manager, ZESTRON Americas, will present “Impact of Multiple Thermal Cycles on the Cleaning Process” at SMTA International 2015.

Printed circuit board manufacturing is a highly complex process and incorporates numerous steps. The soldering process is critical and may include reflow oven and/or wave solder equipment as well as a baking process. PCBs may be single or double-sided in which case multiple thermal cycles are required. There are many opportunities to clean PCBs following a soldering process, either from single, dual or dual and baked thermal cycles. This study was conducted to assess the effects of numerous thermal cycles on the PCB cleaning process. Solder pastes considered included RMA, No Clean and Water Soluble (OA), both leaded and lead-free.

SMTA International 2015 will be held at the Donald Stephens Convention Center in Rosemont, IL from September 29 to September 30. Mr. Tosun will present during the “Cleaning Parameters and Cleanliness Monitoring of Electronics Assemblies” session on September 30, at 8:00 AM.  For more information on our process solutions, services and learning opportunities, please visit booth #616.

About ZESTRON

Headquartered in Manassas, Virginia, and operating in more than 35 countries, ZESTRON is the globally leading provider of high precision cleaning products, services and training solutions for the electronics manufacturing industry. With six worldwide Technical Centers and the largest team of chemical engineers in the industry, ZESTRON’s commitment to ensuring that its customers surpass even the most stringent cleaning requirements is without equal.

For additional information and to tour one of our unparalleled technical centers, please visit www.zestron.com.

Share




Suggested Items

New Book from I-Connect007 Examines Evolution of Electronics Industry NPI

08/01/2022 | I-Connect007
The Electronics Industry’s Guide to… The Evolving PCB NPI Process is the first book in I-Connect007’s new The Electronics Industry’s Guide to… technical series. This valuable resource is for all segments of the electronics interconnect industry.

Big Data Can Bring Your Business Back

04/20/2022 | Zac Elliott, Siemens Digital Industries Software
Let’s face it, in the past, electronics manufacturing has not been a big business for North America. A majority of electronics are assembled in Asia where supply chains and operating costs offer many economic advantages. In North America, the electronics manufacturing industry has been generally focused on lower volume, high-cost devices, while higher volume products are produced elsewhere. However, the COVID pandemic and various legislation in the U.S. are changing the situation, making electronics manufacturing in North America a more attractive option. How can factories in North America compete for the same type of manufacturing traditionally performed in lower-cost regions?

José Servin Receives IPC Dieter Bergman Fellowship Award

03/23/2022 | Patty Goldman, I-Connect007
The Dieter Bergman IPC Fellowship Award is given to individuals who have fostered a collaborative spirit, made significant contributions to standards development, and have consistently demonstrated a commitment to global standardization efforts and the electronics industry. José Servin has worked as an IPC member for more than 14 years in the development of the Electronics Assembly Norms. As a member of the IPC A-610 and J STD-001 working groups, he became chairman of IPC A-610G and J STD-001G Automotive Addendums that complements the norms for automotive industry since 2018.



Copyright © 2022 I-Connect007. All rights reserved.