Ventec International to Exhibit at TPCA 2015


Reading time ( words)

Ventec International Group, a world leader in the production of polyimide & high reliability epoxy laminates and prepregs, today announced that it will exhibit in Booth #K011 at the TPCA Show 2015, scheduled to take place October 21. - 23, 2015 at the Taipei Nangang Exhibition Center, Taiwan. Ventec's experts will present the company’s next generation low Dk material range and ultra-thin laminates and prepregs. 

Demand for high performance materials, particularly for high-end storage, telecommunications and automotive applications requiring high signal transmission speed and low transmission loss, is driving the advancement of high speed and high frequency solutions. Ventec offers a total solution of low loss materials and will be highlighting the VT-462 and VT-464 series of low Dk/low Df, high reliability products which offer excellent Laser drilling ability and better dimensional stability, lower cost and longer shelf life. To meet environmental requirements for non-brominated flame retardants, VT-464 achieves UL94 V-0 whilst retaining its low loss characteristics, and is based on a halogen-free epoxy resin technology. High glass transition temperature and excellent thermal reliability ensure compatibility with lead-free assembly processes.

Furthermore, increased miniaturization and higher component density, driven by greater functional demands from consumer, automotive, mil/aero and medical applications and devices, are accelerating rapid advances in laminate technology for next generation PCB’s. As a direct consequence, the demand for process capability of ultra-thin laminates and prepregs is on the rise. Ventec’s advanced solutions offer a range of ultra-thin materials with a minimum dielectric thickness of 25 microns.

The latest advancements in prepreg & laminate production including Ventec’s full range of IMS materials for thermal management & a comprehensive range of standard, halogen-free & high-temp & high reliability grades of FR4 will also be highlighted.

Ventec International Group’s COO Jason Chung commented: “Taiwan ranks at the top of the leaderboard for PCB manufacturing both in output quantity and value. It is no wonder therefore that the TPCA Show is the must-visit event for the entire PCB industry and for Ventec Asia it’s a highlight in our show calendar. At Ventec we work in partnership with our OEM customers to co-develop next generation products that meet their requirements. Throughout the show, our team of technical and supply chain experts will be on hand to meet our customers and help visitors select and specify the best materials that will enable optimum product performance and cost-effectiveness without compromising manufacturability or functionality.”

For more information about Ventec’s solutions and the company’s wide variety of products, please visit www.venteclaminates.com.

About Ventec International

With volume manufacturing facilities and HQ in Suzhou China, Ventec International specializes in advanced copper clad glass reinforced and metal backed substrates for the PCB industry. With distribution locations and quick-turn CCL manufacturing sites in both the US and Europe, Ventec International is a premier supplier to the Global PCB industry. For more information, visit www.ventec-usa.com or www.ventec-europe.com.   

Share




Suggested Items

Plating on Silver: What’s Old is New Again

07/07/2022 | Denis Jacques, Technic Inc.
About three decades ago, immersion silver, a nitrate-based process, gained a lot of market share in the world of PCB final finishes. More economical than ENIG, flat, solderable, and conductive, it had everything going for it—everything but corrosion resistance in a harsh environment, that is. Champagne voids were also an issue, along with line reduction. But the worst drawback, the characteristic that made the part short over time, was creep corrosion. A build-up of copper sulfide salt that grows in contact with a sulfur-rich environment, heat, and moisture resulted in failures in the field. This was enough to scar the process for good.

EIPC Summer Conference 2022: Day 2 Review

06/29/2022 | Pete Starkey, I-Connect007
Örebro, Sweden on June 15 brought a bright and early start to Day 2 of the EIPC Summer Conference for those who had enjoyed the previous evening’s networking dinner, but had resisted the temptation to over-indulge or to carry on their long-awaited catch-up conversations with old friends into the small hours. All but a few were in their seats for 9 a.m., awake and attentive for Session 4 of the conference, on the theme of new process technologies, moderated by Martyn Gaudion, CEO of Polar Instruments.

EIPC Summer Conference 2022: Day 1 Review

06/28/2022 | Pete Starkey, I-Connect007
At last, a live EIPC conference and this time in the Swedish city of Örebro, “where history and contemporary culture converge,” a pleasant and convenient location for an event that included a privileged visit to the Ericsson facility in Kumla. Around 100 delegates made the journey and the Örebro Scandic Grand Hotel was an excellent conference venue for the June 14-15 conference.



Copyright © 2022 I-Connect007. All rights reserved.