The Associations Issue
December 15, 2015 | Patty Goldman, I-Connect007Estimated reading time: 1 minute
Well, it’s the end of the year. How did that happen? It really is true that every year goes by a little faster. You young whippersnappers out there won’t know what I’m talking about, but just you wait and see.
We changed it up for our December issues this year. Instead of doing a year-end review, we decided to devote this month to our associations and trade organizations—at least some, because when you start poking around, you will find there are scads of them.
I’ve been involved in IPC activities since ‘80 or ’81; I’m not sure anymore. I have made a ton of friends in this crazy industry of ours, learned a tremendous amount, and put in a lot of hours on subcommittee meetings and document writing. I started out by volunteering to chair the Process Effects Task Group and we put out a pretty complete PCB Troubleshooting Guide within two years or so—amazing at the time. We went through a few revisions over the years, and then I moved on to chair the Glass Reinforcement Task Group and in the meantime, served as TAEC chairman (explained later).
The key word here is “volunteer.” I know many or you can’t quite make that connection between volunteering and “I have learned so much,” but that truly is a great way to learn— much better than a classroom (go ahead, ask any volunteer). Even if you are writing just a paragraph or two for a document, you will research the heck out of it to make sure you have the right information, but you’ll also have this network of other volunteers to call upon for help.
The other connection to make is this: When you are working on a standard or specification you really can have input. The standards you use every day are not pulled out of thin air, nor are they written automatically by computers. They are written by people just like you. Tests are performed to verify data by member companies—just like yours—big or small.
Read the article here.
Editor's Note: This article originally appeared in the December 2015 issue of The PCB Magazine.
Suggested Items
Big Win for Defense Production Act Budget Allocation in FY24 Budget
04/23/2024 | I-Connect007 Editorial TeamOne year ago, President Biden issued a determination that chips and packaging are critical for national security. Since that time, much work has been done to continue the conversation in Washington, elevating the importance of the entire chips value chain, and including printed circuit boards and substrates, without which chips cannot operate.
Real Time with... IPC APEX EXPO 2024: A Conversation with IPC's CEO: New Venue, Sustainability, and More
04/23/2024 | Real Time with...IPC APEX EXPOBarry Matties hosts Dr. John W. Mitchell, CEO of IPC, on the final day of IPC APEX EXPO 2024. They discuss the new venue in Anaheim and broach a range of topics, from traffic and booth experiences to workforce development, sustainability, and the CHIPS Act. And they offer advice for newcomers as IPC looks forward to an even better show experience next year.
Boeing's Janene Stinson Earns IPC Excellence in Education Award at IPC APEX EXPO 2024
04/22/2024 | IPCThe IPC Excellence in Education award was presented to Janene Stinson, Boeing, at IPC APEX EXPO 2024 in Anaheim, California, in recognition of her significant contributions to workforce development and leadership.
What’s Next Becomes Now at IPC APEX EXPO 2024
04/22/2024 | IPCFrom revolutionary advancements in artificial intelligence, augmented reality and the latest innovations in capital equipment on the show floor to a heightened learner experience through the 16th Electronic Circuits World Convention (ECWC16) technical conference, IPC APEX EXPO 2024 provided education, professional development and numerous networking opportunities, for 3,723 attendees from 57 countries.
Real Time with... IPC APEX EXPO 2024: Looking Back, Looking Forward With IEC
04/19/2024 | Real Time with...IPC APEX EXPOIEC came to the RTW booth and discussed both the legacy of IEC's past and the vision for its future. Industry veteran Bruno Ferri highlighted his quarter-century tenure in the industry and with IEC since its founding. He still exhibits boundless enthusiasm for the industry. Brando Stone, a young professional and a future face of IEC, talked about IEC's plans going forward and his experience at this year's IPC APEX EXPO.