Robotic Drones to 'Print' Emergency Shelters for Those in Need
February 18, 2016 | Bath UniversityEstimated reading time: 2 minutes
A new research project aims to develop the world's first flying robots capable of autonomously assessing and manufacturing building structures to help areas suffering from natural disasters.
The four year collaborative research project entitled ‘Aerial Additive Building Manufacturing: Distributed Unmanned Aerial Systems for in-situ manufacturing of the built environment’ involves researchers from the University of Bath, Imperial College and University College London.
Providing disaster relief
The research team aims to develop drones that can use an Additive Building Manufacturing (ABM) system to reach remote and disaster areas, and 3D print structures such as shelters and buildings, providing much needed disaster relief.
The drones being developed could fly to a disaster zone, scan and model the landscape using Building Information Management (BIM) systems, design temporary shelters, and print them on the spot. This could give those in need a place to live until emergency services personnel can reach them.
Revolutionising remote construction
ABM is a key technological building revolution currently transforming the construction industry by allowing the 3D printing of buildings and building components, resulting in quicker build times and reduced material and transport costs.
However, due to their large size, ABM systems are inflexible making it difficult for them to undertake maintenance and repair work, especially in remote and rural areas.
World's first mobile factories
Whilst many drones are used for photography and surveillance, the drones in this project will utilise a revolutionary ABM system to remotely manufacture building structures such as shelters and bridges for those in need.
In order to use this type of system for post-disaster reconstruction activities where the manufacturing speed of ABM would be hugely beneficial, the research team aims to develop the world's first ABM system consisting of a swarm of aerial robots that can autonomously assess and manufacture building structures.
To do this, the team plans to miniaturise ABM and give it aerial capabilities so that it can be more mobile and able to manufacture complex high-rise structures. This would enable the robots to act as flying mini-factories, where they would land at to a construction site and work together to create buildings from scratch.
Co-investigator and Senior Lecturer in our Department of Architecture & Civil Engineering, Dr Richard Ball said: “We are delighted to be part of this ambitious and exciting project which will push the forefront of construction technologies into the future.”
Co-investigator and Senior Lecturer in our Department of Architecture & Civil Engineering, Dr Chris Williams added: “It is exciting to be working on a project where the structure has to be so light and efficient that it can be built by small flying drones.”
The University’s Department of Architecture & Civil Engineering was ranked equal first in the UK in Architecture & the Built Environment for the high quality and international impact of its research (2014 Research Excellence Framework). In the assessment, 85 per cent of its research output was judged to be internationally excellent while 90 per cent of its research impact was judged outstanding.
Suggested Items
SEMI Applauds U.S. Chips Act Award for Samsung Electronics Facilities to Strengthen Domestic Semiconductor Supply Chain
04/17/2024 | SEMISEMI, the industry association serving the global electronics design and manufacturing supply chain, applauded the United States Department of Commerce’s announcement of a Preliminary Memorandum of Terms for an award under the CHIPS and Science Act to support the expansion of Samsung Electronics’ presence in Texas and the company’s development and production of leading-edge chips.
Ark Electronics Expands Global Manufacturing Factory Network in North America and Europe
04/17/2024 | PRNewswireElectronic Manufacturing Company Ark Electronics recently announced the expansion of its Global Factory Network with the addition of Electronics Manufacturing Service (EMS) capabilities in Mexico and Europe.
SIA Applauds CHIPS Act Incentives for Samsung Manufacturing Projects in Texas
04/16/2024 | SIAThe Semiconductor Industry Association (SIA) released the following statement from SIA President and CEO John Neuffer applauding semiconductor manufacturing incentives announced by the U.S. Department of Commerce and Samsung.
Report Reveals ‘True Impact’ of Manufacturing is Nearly a Quarter of UK GDP
04/15/2024 | Manufacturing Technologies AssociationManufacturing is having a far greater impact on the UK economy than first thought according to a major new report released today.
Design Community Town Hall Review
04/11/2024 | Kelly Dack, CID+, EPTACThe Design Community Town Hall took place on the afternoon of April 10, 2024. I was fortunate to attend this event, which marked an opportunity for members of some newly found design groups to get together and exchange ideas. Peter Tranitz, senior director of solutions for IPC, opened the session with a slide presentation introducing these new groups and members within the solutions department.