-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Happy’s Essential Skills: Design of Experiments
March 17, 2016 | Happy HoldenEstimated reading time: 9 minutes
Design of experiments (DOE) is one of the most powerful and influential engineering tools for product yield improvements, new products or processes development, or for problem solving. As mentioned in my last column, process problems led me to a career in printed circuits, and quickly solving those problems led me to a bonus stock award and a great life. Even though I knew nothing about printed circuit manufacturing processes, I was able to quickly find the root causes of all the problems and fix them. My secret? Total quality control (TQC), statistics, and DOE.
Experimentation is the manipulation of controllable factors at different values to see their effect on some desired result. An engineer can use three methods of experimentation:
- Trial and error
- One factor at a time
- Design of experiments
Trial and Error
Hopefully a trained engineer will not use this technique. But in the rush to fix the problem, one might think they know the true root cause and start changing parameters. In my case, I didn’t know the parameters so first I talked to the other engineers, line-workers and supervisors and created a pareto of possible causes. Then I called the chemical suppliers and asked them what they thought was important. Lastly, I went to the industry bible, the Printed Circuit Handbook by Clyde Coombs, and read what it had to say. From this list I got an inkling of what the possible causes could be.
One Factor at a Time
The objective of any experiment is to establish a probable cause-and-effect relationship. The common sense approach is to make trial changes of the most likely factors contributing to the observed problem, keeping all other contributor variables constant during the experiment, and then seeing if a significant correlation can be established between the suspected cause and the effect. If the experiment with the factor chosen gives no conclusive results, the next most likely factor is tried in the same way. Although this experimental strategy sounds logical, as you can see in Figure 1, it tests only a part of the process matrix and only what you know (variables X1, X2 and X3 and changing one at a time from -1 to +1 levels). Four steps are involved in this process:
- Observation: Study all phases of the situation in which the effect to be controlled occurs.
- Reflection: Try to think of all the causes which might influence this effect. Consult with others who have had experience with this or similar situations.
- Trial: Try the influence of the most likely factor; if not successful, try the next most likely one, and so on.
- Check: With a purported relationship established, attempt to turn the effect on and off, like a water faucet, by varying the suspected cause back and forth between its different levels.
The common sense approach is always recommended as a first try. It is fast and cheap when it works— as it often does for confirming single or independent factors whose presence can be logically suspected. However, when it has been tried several times on a problem with no clear cut solution emerging, a more sophisticated approach is called for—that of statistical experimentation.
This was the situation when asked to help the printed circuit plant. Months of tests and experimentation had not resulted in finding a cause for the problems and the solution.
Figure 1: Experimental methods: Can be trial and error or factorial design of experiments (DOE) that is much more comprehensive and effective than one-factor-at-a-time method. The DOE software can be found in The NIST/SEMETECH e-Handbook of Statistical Methods[1].
Page 1 of 3
Suggested Items
Real Time with... IPC APEX EXPO 2024: Exploring IPC's PCB Design Courses with Kris Moyer
04/18/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and IPC instructor Kris Moyer discuss IPC's PCB design training and education offerings. They delve into course topics such as design fundamentals, mil/aero, rigid-flex, RF design, and advanced design concepts. They also highlight material selection for high-speed design, thermal management, and dissipation techniques. The interview wraps up with details about how to access these courses online.
Cadence Unveils Palladium Z3 and Protium X3 Systems
04/18/2024 | Cadence Design SystemsThe Palladium Z3 and Protium X3 systems offer increased capacity, and scale from job sizes of 16 million gates up to 48 billion gates, so the largest SoCs can be tested as a whole rather than just partial models, ensuring proper functionality and performance.
Signal Integrity Expert Donald Telian to Teach 'Signal Integrity, In Practice' Masterclass Globally
04/17/2024 | PRLOGDonald Telian and The EEcosystem announce the global tour of "Signal Integrity, In Practice," a groundbreaking LIVE masterclass designed to equip hardware engineers with essential skills for solving Signal Integrity (SI) challenges in today's fast-paced technological landscape.
On the Line With... Podcast Talks With Cadence Expert on Manufacturing
04/18/2024 | I-Connect007In “PCB 3.0: A New Design Methodology: Manufacturing” Patrick Davis returns to the podcast to talk about design rules. As design considerations become more and more complex, so, too, do the rulesets designers must abide by.
Designing Electronics for High Thermal Loads
04/16/2024 | Akber Roy, Rush PCB Inc.Developing proactive thermal management strategies is important in the early stages of the PCB design cycle to minimize costly redesign iterations. Here, I delve into key aspects of electronic design that hold particular relevance for managing heat in electronic systems. Each of these considerations plays a pivotal role in enhancing the reliability and performance of the overall system.