Against the Density Wall: Landless Vias Might be the Answer
June 27, 2016 | Happy Holden, PCB Technologist-RetiredEstimated reading time: 1 minute
You may not know about landless vias. This has been a well-kept secret for the last 30 years, possibly because it is not permitted on military boards, and therefore, discouraged in all IPC standards. Consequently, when our Japanese partner, OKI Electric, showed us their landless via boards, we said, “You can’t do that; the vias have to have lands!” They replied, “You’ve been listening to IPC again! Try it out and test it!” So we created a test vehicle and tested thousands of vias with various diameters against numerous annular ring vias. Guess what? They were right! As the annular ring got smaller, the failures occurred earlier until we got to landless, and then they jumped to 10X fewer failures. Not understanding this result, the PhDs of HP labs went to work and came up with an explanation (included in this paper). This was so radical a discovery that HP made the data, explanations and results proprietary and a company secret.
Introduction
I saw my first landless via multilayer while visiting NEC at Toyama, Japan back in 1985.
They were an enormous automated facility making Japanese telecom and mainframe computer boards, kind of like IBM and Western Electric rolled into one. NEC was using the liquid electrophoretic, positive-acting photoresist process with panel-plating. I wouldn’t see another landless via multilayer until our Japanese partner (OKI) introduced it to us in 1988. OKI was using the landless vias to achieve higher density without having to pay the extra costs of finer lines. They knew about the higher reliability that resulted, and they had done their own testing, but were after the higher routing density and it allowed them to route five traces between 0.100 inch PTH centers.
The Electrodeposited-Positive Acting Photoresist
My first introduction to the positive-acting photoresist (+PR) was at Hewlett-Packard’s integrated circuit fabrication facility in Palo Alto, California in 1970. HP used this in the liquid form and it was spin-coated on wafers. The photoresist was supplied by Shipley Company of Newton, Massachusetts. I was further exposed to the +PR after moving to the printed circuit fabrication facility.
Editor's Note: This article originally appeared in the June 2016 issue of The PCB Magazine.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/26/2024 | Andy Shaughnessy, Design007 MagazineIn this week’s roundup, we have a variety of articles covering everything from design through assembly, and even box build. I’ve always wondered whether box build was all it was cracked up to be. Do customers really pick one EMS provider over another because one company offers box build? And if you’ve ever wanted to volunteer, IPC’s Thought Leaders Program is looking for a few good technologists to help them on their mission. Check out Stanton Rak’s article, which was published in the spring issue of IPC Community.
Stan Rak: Elevating the Ideas and Insights of IPC's Thought Leaders Program
04/25/2024 | Stanton Rak, SF Rak CompanyAs a member of the IPC Thought Leaders Program (TLP), I am responsible for identifying knowledge-sharing opportunities that can generate ideas and insights that strengthen the IPC community as well as create a sustainable and lasting future for its members. I am delighted to highlight some of my recent contributions as a member of the TLP.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).
IPC Design Competition Champion Crowned at IPC APEX EXPO 2024
04/24/2024 | IPCAt IPC APEX EXPO 2024 in Anaheim, California, five competitors squared off to determine who was the best of the best at PCB design.
Big Win for Defense Production Act Budget Allocation in FY24 Budget
04/23/2024 | I-Connect007 Editorial TeamOne year ago, President Biden issued a determination that chips and packaging are critical for national security. Since that time, much work has been done to continue the conversation in Washington, elevating the importance of the entire chips value chain, and including printed circuit boards and substrates, without which chips cannot operate.