Datest Renews Dual ISO/AS9100 Certification and ITAR Registration


Reading time ( words)

Datest, a provider of advanced, efficient and mission-critical in-circuit testing, test engineering, flying probe, JTAG  and X-ray inspection solutions, today announced that it has passed its recertification audit for its dual ISO9001 / AS9100C Certification. Datest is the only U.S. test engineering and test services company that has earned dual ISO/AS9100 Certification as well as ITAR Registration. The dual recertification is emblematic of Datest’s success and relentless drive to provide quality PCBA testing and inspection solutions to a discerning, engineering-based clientele. Both certifications are recognized and respected throughout the world as symbols of expertise, professionalism and general process control. AS9100 certification is often viewed as a prerequisite to aerospace manufacturing certification and AVL approval.

With this milestone, Datest maintains the appropriate certifications to serve the aviation, space and defense industries. AS9100 certification also affirms that Datest’s quality management system has been accepted by the aerospace industry and ensures compliance with meticulous contract review and adequate risk management throughout the supply chain, all of which has been demonstrated, by means of objective evidence, to the satisfaction of a third-party auditor.  Recertification has a term of three years, to July 2019, subject to annual surveillance audits.

The AS9100 quality standard is based on ISO 9001, adding more stringent requirements specific to the aviation, space and defense industry, while striving to meet the needs of all associated stakeholders. Revision C is the fourth and latest release of the AS9100 standard, which takes in the revised requirements of ISO 9001:2008 and nearly 100 additional criteria specific to the aerospace industry. Revision C changes include greater focus on planning and project management, additional emphasis on risk management and mitigation, and the need to develop plans for continuous improvement of customer satisfaction.

“With the successful completion of this recertification, Datest now begins its seventh year with ISO9001/AS9100 certification as well as ITAR registration,” commented Robert Boguski, Datest’s President. “These are highly visible, industry-accepted markers for process control and management as well as security.  We are proud to hold them, and privileged to serve our industry in the test engineering and analytical realm, as we have done for the past 32 years and will continue to do in the years ahead, as our business and our industry continue to evolve and innovate.”

A test engineering leader since 1984, Datest offers advanced, integrated PCBA testing and inspection services to the CM/EMS as well as the OEM community. A leading provider of in-circuit testing (ICT) and test development (hardware and software) for all major ICT platforms (Keysight 3070 with x1149, GenRad, and Teradyne), Datest augments ICT with SPEA Flying Probe testing, Automatic X-ray Inspection (AXI) , and DAGE Ruby 2D X-ray with X-Plane Technology, benchtop boundary scan and functional testing.  Datest features non-destructive as well as destructive failure analysis of problematic PCBAs.  Datest also has introduced reverse engineering services as well as analytical laboratory services (SEM, EDX, XRF, FTIR and C-SAM) for board-level as well as component-level failure analysis.

Datest has won multiple industry awards for its services, including two NPI Awards from Circuits Assembly Magazine (2011 and 2012) and three Global Technology Awards from Global SMT and Packaging Magazine (2011, 2013 and 2015).  Most recently, Datest was the recipient of the prestigious Circuits Assembly 2016 Service Excellence Award at the IPC APEX Expo, in the category of testing laboratories.

About Datest

Datest is an ISO9001 and AS9100C-certified, ITAR-registered provider of advanced, integrated PCBA testing and inspection services to the CM/EMS and OEM communities since 1984.  Datest features in-circuit testing and test engineering development for all major platforms as well as flying probe testing, boundary scan testing, functional testing, and four kinds of x-ray inspection (2D, 3D, CT-Scan, and AXI).  Datest also offers a wide variety of engineering and value-added services, including failure analysis and “bonepile” rehabilitation.  Datest also proudly introduces counterfeit component detection services, consistent with SAE AS 5553 and PRO-STD-001. 

Share

Print


Suggested Items

Process Ionic Contamination Test (PICT) Standard Roundtable With Industry Experts

04/22/2020 | I-Connect007
With standards committees set to release the first of four new test standards, industry experts discussed the process ionic contamination test (PICT) standard, which was recently approved by the IEC for publication. Roundtable participants included Teresa Rowe, senior director of assembly and standards technology at IPC, Graham Naisbitt, chairman and CEO of Gen3, Jason Keeping, corporate process development at Celestica, and Doug Pauls, principal materials and process engineer at Collins Aerospace.

SMTA Europe’s Electronics in Harsh Environments Conference and Exhibition: A Taste of Things to Come

04/14/2020 | Pete Starkey, I-Connect007
SMTA Europe’s Electronics in Harsh Environments Conference has become a must-attend annual event; unfortunately, it also became another casualty of the COVID-19 lockdown. Scheduled to take place in Amsterdam, the Netherlands, from April 21–23, 2020, it has now been postponed until December 1–3. Pete Starkey reports on a preview seminar presented by SMTA Europe.

This Month in SMT007 Magazine: Exclusive Interview With Burt Rutan, Aerospace Legend

04/03/2020 | I-Connect007 Editorial Team
If you follow advancements in aerospace technologies and expeditions, then you know the name Burt Rutan. Described by Newsweek as “the man responsible for more innovations in modern aviation than any living engineer,” Rutan is a bold visionary with a passion for the advancement of technology, who has designed 46 aircraft throughout his career. Following his IPC APEX EXPO keynote presentation, Rutan stopped by the I-Connect007 booth and shared his thoughts on a wide variety of topics.



Copyright © 2020 I-Connect007. All rights reserved.