Perovskite Can Take the Heat
July 25, 2016 | A*STAREstimated reading time: 1 minute
Solar cells that are cheaper and easier to manufacture could challenge the dominance of silicon, with new research showing an alternative material called perovskite is more efficient and adaptable than previously thought.
The challenge to developing efficient and cheap commercially available solar panels has, until now, been dominated by silicon, with emerging alternative solar cells considered minor players, says Wei Lin Leong from the A*STAR Institute of Materials Research and Engineering.
“Silicon is very labor-intensive and requires very high temperatures to process,” Leong explains. “But with alternative cells there is inefficiency in capturing the energy from the Sun”.
Perovskite is relatively easy to process, and therefore cheaper to manufacture, but also has an efficiency of 22 per cent, close to silicon cells’ 25 per cent.
Yet, the dominance of commercial and research investment in silicon has made it difficult to convince researchers and commercial developers to adopt new technology.
“This new class of solar cell is only around four years old, so although it has high performance, people don’t understand the system and why it’s doing so well,” Leong says.
Her research has provided important insights into the basic physics of perovskite solar cells by measuring their efficiency at different temperatures and light intensities1.
“Because it had only been tested at room temperatures, people were skeptical about whether it would still work at the higher temperatures under direct sunlight on a rooftop, where it can go up to 60 degrees Celsius,” Leong says.
For most conventional or silicon-based solar cell technologies, efficiency worsens as temperature rises.
Leong’s study showed the perovskite cells still worked at higher temperatures, with performance peaking at around 330 Kelvin — or 57 degrees Celsius — and then declining slightly after that, meaning their performance will be high even on a relatively hot rooftop. It also showed that, contrary to arguments made by some critics, the material was highly efficient at collecting charge through electrodes.
Leong believes that perovskite will eventually challenge silicon commercially. “In terms of efficiency, perovskite is already close and it can be made much more cheaply,” she says.
However, perovskite cells still contain lead, which means more research needs to be done to ensure the lead does not leak. “Another big challenge is to make cells big enough for commercial use, as right now all the research is on small cells,” she says.
Suggested Items
Gartner Forecasts Worldwide IT Spending to Grow 8% in 2024
04/17/2024 | Gartner, Inc.Worldwide IT spending is expected to total $5.06 trillion in 2024, an increase of 8% from 2023, according to the latest forecast by Gartner, Inc. This is an increase from the previous quarter’s forecast of 6.8% growth and puts worldwide IT spending on track to surpass $8 trillion well before the end of the decade.
Argonne, RIKEN Sign a Memorandum of Understanding in Support of AI for Science
04/16/2024 | BUSINESS WIRELeaders in high performance computing in the U.S. and Japan have signed a memorandum of understanding (MOU) establishing a cooperative relationship in support of artificial intelligence (AI) computing projects.
RAICo Fellowship to Widen Participation Within the Field of Robotics and Artificial Intelligence
04/12/2024 | RAICoWOMEN and those early in their academia career who are passionate about robotics and artificial intelligence are encouraged to apply for a RAICo Fellowship.
Indium to Host Free Webinar on Lead-Free Solder Paste for Automotive Applications
04/09/2024 | Indium CorporationIndium Corporation’s Senior Research Metallurgist, Jie Geng, Ph.D., will conduct a webinar on low-voiding, high-reliability, lead-free solder paste for automotive applications.
SMTA Announces Program for High Reliability: Strategic Technology Advancement Research Forum
04/08/2024 | SMTAThe SMTA announced the finalized program for the High Reliability: Strategic Technology Advancement Research Forum which takes place on May 2, 2024 in Olathe, Kansas, USA. The event, now in its second year, addresses challenges for electronics manufacturers in the high reliability sector.