Making Terahertz Lasers More Powerful
July 27, 2016 | AMERICAN INSTITUTE OF PHYSICSEstimated reading time: 1 minute
Researchers have nearly doubled the continuous output power of a type of laser, called a terahertz quantum cascade laser, with potential applications in medical imaging, airport security and more. Increasing the continuous output power of these lasers is an important step toward increasing the range of practical applications. The researchers report their results in the journal AIP Advances, from AIP Publishing.
Terahertz radiation sits between microwaves and infrared light on the electromagnetic spectrum. It is relatively low-energy and can penetrate materials such as clothing, wood, plastic and ceramics. The unique qualitites of terahertz radiation make it an attractive candidiate for imaging, but the ability to produce and control terahertz waves has lagged behind technology for radio, microwave and visible light.
Recently, scientists have made rapid progress on a technology to produce terahertz light called a quantum cascade laser or QCL. Quantum cascade lasers are made from thin layers of material. The thin layers give the laser the valuble property of tunability, meaning the laser can be designed to emit at a chosen wavelength. The output power of terahertz QCLs is also relatively high compared to other terahertz sources, said Xuemin Wang, a researcher in the China Academy of Engineering Physics and first author on the new paper.
Wang and his colleagues' work focuses on even further increasing the output power of terahertz quantum cascade lasers, especially in the mode in which the laser output power is continuous. "In engineering, biomechanics and medical science, the applications require continuous wave mode," Wang said.
By optimizing the material growth and manufacturing process for terahertz QCLs, Wang and his team made a laser with a record output power of up to 230 milliwatts in continuous wave mode. The previous record was 138 milliwatts.
Wang said the new 230 milliwatt laser could be used in air, a challenge for lower-powered lasers since particles in the air can scatter or absorb the laser light before it reaches its target.
The increase demonstrates that the team's method of precisely controlling the growth of the laser's layers can increase output power, Wang said, and he is hopeful that future improvements could bring the continuous power above 1 watt. The 1 watt level has been reached in terahertz QCLs in pulsed wave mode.
Wang said he thinks scientists and engineers could use the new laser as a flexible source of terahertz radiation for spectroscopy, medicial imaging, remote sensing and other applications.
Suggested Items
Inkjet Solder Mask ‘Has Arrived’
04/10/2024 | Pete Starkey, I-Connect007I was delighted to be invited to attend an interactive webinar entitled “Solder Mask Coating Made Easy with Additive Manufacturing,” hosted by SUSS MicroTec Netherlands in Eindhoven. The webinar was introduced and moderated by André Bodegom, managing director at Adeon Technologies, and the speakers were Mariana Van Dam, senior product manager PCB imaging solutions at AGFA in Belgium; Ashley Steers, sales manager at Electra Polymers in the UK; and Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands.
NetVia Group Acquires Direct Imaging from Mivatek
04/09/2024 | Miva TechnologiesMiva Technologies is pleased to announce NetVia Group, Irving, TX has acquired a new Miva 2400NG Dual Tray Direct Imaging System with 30-micron capabilities for inner, outer and soldermask imaging.
Teledyne to Acquire Adimec
02/13/2024 | TeledyneTeledyne Technologies Incorporated announced that it has entered into an agreement to acquire Adimec Holding B.V. and its subsidiaries.
Real Time with... productronica 2023: MivaTek Global Advances Technology With High-res Imaging System
12/08/2023 | Real Time with...productronicaMivaTek's Brendan Hogan talks about how the company employs Digitally Adaptive Rasterization Technology (DART) in their high-res imaging equipment. He also shares how the blurred line between semiconductors and microelectronics is driving broader application of the imaging process.
Keysight Enables Validation of Arbe 4D Imaging Radar Chipset
11/30/2023 | Keysight Technologies, Inc.Keysight Technologies, Inc. announces that Arbe has selected the E8719A Radar Target Solution (RTS) to test the Arbe 4D imaging radar chipset for automotive applications.