-
-
News
News Highlights
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueIPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
The Cost of Rework
In this issue, we investigate rework's current state of the art. What are the root causes and how are they resolved? What is the financial impact of rework, and is it possible to eliminate it entirely without sacrificing your yields?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Material Effects of Laser Energy When Processing Circuit Board Substrates During Depaneling
July 27, 2016 | Ahne Oosterhof, LPKF Laser & Electronics North AmericaEstimated reading time: 13 minutes
Using modern laser systems for the depanelization of circuit boards can create some challenges for the production engineer when it is compared to traditional mechanical singulation methods. Understanding the effects of the laser energy to the substrate material properly is essential in order to take advantage of the technology without creating unintended side effects. This paper presents an in-depth analysis of the various laser system operating parameters that were performed to determine the resulting substrate material temperature changes. A theoretical model was developed and compared to actual measurements. The investigation includes how the temperature increase resulting from laser energy during depaneling affects the properties of the PCB substrate, which varies from no measurable change to a lowering of the surface resistance of the cut wall depending on the cutting parameters.
In addition, the amount and properties of the ejecta that are potentially resulting from the laser processing is investigated. Understanding the composition and quantity of any resulting residue may have a great impact to both the board design and the selection of the appropriate circuit board singulation method that will achieve the best possible results. An energy dispersive X-ray analysis method (EDX) was performed to investigate if any unwanted material compounds are present on the cutting sidewalls of an FR4 circuit board substrate as a result of laser energy induced during the depaneling process.
Depaneling Methods
Many depaneling methods are being used in the industry, such as:
- punching/die cutting
- v-scoring
- wheel cutting/pizza cutter
- sawing
- water jet
- routing (+nibbling)
Some of these are useful only in very low cost, minimal quality applications; others can only be used for rectangular boards. Several can do damage to the board edges because of significant pressure and/or bending forces potentially causing some delamination which may impact long-term reliability. All this means that during the board layout care must be exercised to keep fragile components and sometimes circuit traces away from board edges. And the waterjet method has hardly been explored.
The most commonly used method is the routing where a kerf is cut around each board, regardless of board shape, by the panel manufacturer. To keep the board in the panel during the assembly process in a few locations the kerf is interrupted. The routed kerf in the panel typically is about 3 mm wide, which means that in a case with many small boards a significant amount of panel space is used for cutting slots. Sometimes, with many slots in the panel, the panel becomes less rigid and panel supports or a pallet is required during the assembly process. Typically, holes are being drilled in the connected areas to make it easier to break the boards from the panel which means that during board layout these locations must be decided and fragile components must be kept away from them.
Figure 1: Combining various singulation methods in the one panel.
Laser Cutting
The latest method added is laser routing, which can be done after the last step in the board assembly process. This means the panel retains its rigidity throughout the previous assembly steps. Like a router, the laser cuts completely through the board, so no bending or pressing on the edges of the board occurs, which means no stresses are exerted on the board material. With the use of a laser, cutting any board shape can be accommodated, and the changeover to different boards is very quick as the process is completely computer controlled.
Laser System
The three main parts of a laser cutting system are the laser, the X-Y table for panel movement and the scanner to move and locate the beam.
Figure 2: Example of a laser depaneling system in an in-line setting for automatic loading and unloading.
To cut various materials, several types of lasers are available. These have varied from CO2 at about 10 um wavelength available for well more than 20 years to UV lasers at about 350 nm wavelength showing up around 10 years ago. About 20 years ago the Nd:YAG lasers at 1054 nm wavelength were introduced to be used in stainless steel stencil cutting systems.
As the wavelength gets shorter the lasers have been more difficult to be produced economically, which has led to the gradual timewise availability of the different systems. Shorter wavelength lasers and those with very short pulse widths have typically been much more expensive, which is why it has taken time to get them deployed in the industry.
Infrared lasers can be called “hot” lasers as they heat and burn a path in the material to be cut. With UV lasers it is possible to ablate the material. A short high-energy pulse enters the top layer of the material and evaporates and explosively removes a layer of the material. By going over the same path several times, ultimately a cut is obtained through the material. As very little heat is produced by the UV beam, there is very little or no burned material on the edges of the cut depending on how the laser is being used (Figure 3).
Figure 3: Infrared cut versus ultra violet cut.
Depending on the wavelength of the light, some materials reflect it and some are completely transparent. For the ablation method to work, the laser beam has to penetrate into the material to be cut. Figure 4 shows how various circuit board constituents react with different wavelengths. To be able to ablate all of them the UV laser is a good choice. UV lasers (wavelength ~350 nm) have become economically attractive only for the past 10 years.
Page 1 of 6
Suggested Items
LPKF Reports Strategic Successes and Narrowly Achieves Forecast for 2023 Financial Year
03/26/2024 | LPKFLPKF Laser & Electronics SE generated revenue of EUR 124.3 million in the financial year (previous year: EUR 123.7 million) and earnings before interest and tax (EBIT) of EUR 3.7 million (previous year: EUR 6.8 million), putting the EBIT margin at 3.0% (previous year: 5.5%).
LPKF Receives Major Customer Order in Solar
03/18/2024 | LPKFThe technology company LPKF Laser & Electronics SE has once again received a major order in the solar market, continuing its long-standing successful collabo[1]ration with a leading international manufacturer.
LPKF's Business Development In Q3 Gains Significant Momentum
10/26/2023 | LPKFThe business development of LPKF Laser & Electronics SE has gained significant momentum in the last three months.
LPKF Posts Strong Order Book in Q1 Supports Growth Trajectory
05/02/2023 | LPKFIn the first quarter of 2023, LPKF Laser & Electronics SE generated consolidated revenue of EUR 20.2 million (1Q22: EUR 25.8 million including customer push outs from 2021) and earnings before interest and taxes (EBIT) of EUR -6.6 million (1Q22: EUR 1.0 million), which is in line with our forecast.
LPKF Significantly Increases Revenue, Earnings in the 2022 Financial Year
03/23/2023 | LPKFIn the 2022 financial year, LPKF Laser & Electronics SE achieved a consolidated revenue of EUR 123.7 million (previous year: EUR 93.6 million) and earnings before interest and taxes (EBIT) of EUR 6.8 million (previous year: EUR 0.1 million).