-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Ucamco Seeks Comments on Adding Netlists to Gerber
August 10, 2016 | Karel Tavernier, UcamcoEstimated reading time: 2 minutes
At Ucamco, we are dedicated to excellence in everything that we do. That includes our decades-long stewardship of Gerber, the de-facto standard image format for PCB design: our ongoing work on Gerber ensures that this free, open format keeps abreast of, and indeed drives, beneficial developments in PCB design and engineering.
Once again, we welcome your input on our latest proposal, which is to include the CAD netlist in Gerber. Our principal aim in doing so is to make life easier for electronics design, manufacturing and assembly professionals by facilitating clear, unequivocal communications prior to production. Before this goes live, we ask you to read the proposed new draft specification and share your comments and constructive criticism with us.
Further reading
In the new proposal, new X2 object attributes allow the inclusion of CAD netlists in Gerber fabrication data. These enable the following:
- The component reference designator, pin number and net name – a row in the CAD netlist - can be attached to the component pads in the Gerber file.
- The netlist can be attached to any conducting object.
- The component reference can be attached to any object, so it is now possible, for example, to identify all the legend objects belonging to a given component.
The goal of the Gerber netlist is to facilitate upfront communication between the different parties involved in design, assembly and automation.
To this end, and for example:
- A CAD netlist attached to pads defines the position and orientation of external components, which is essential for assembly and for complete board display.
- By using netlist names, even simple viewers can display netlists without the need for special algorithms to compute connectivity.
- The netlist provides a powerful redundancy check during CAM input, reducing the probability of image errors to virtually zero.
We have taken great care to make this new capability complete yet simple and straightforward in its implementation and adoption. True to the Gerber hallmark of simplicity and power, there are no needless bells and whistles.
The new capability is fully compatible with existing and legacy applications and files as the new attributes do not affect the image. Furthermore, the CAD netlist information and attributes are not mandatory, so if they are not needed to process a Gerber file, they can be skipped and the file remains valid. While these attributes provide very useful fabrication data, it is not necessary to expend any development effort to include them in design and manufacturing processes if they are not seen as bringing any benefit to a particular application.
This proposed new development overlaps to some degree with the venerable IPC-D-356 format, but the design goal is completely different. The 356 format aims to provide a data input method for bare board electrical test. Gerber netlist, rather than to drive testers, aims to facilitate upfront communication, prior to manufacturing proper. Accordingly, it does not contain the adjacency list, fiducials, and other information needed for electrical test. The advantages of the Gerber netlist lie precisely within this limitation as it is easier to understand and implement than 356.
Our sincere thanks go to Jean-Pierre Charras for his insightful comments which contributed so much to this draft.
We are publishing this draft specification to allow the Gerber user community to review and comment on the new feature before it is cast in concrete. To review the specification, click here. To share your comments and constructive criticism, click here.
Thank you,
Karel Tavernier
Managing Director
Ucamco
Suggested Items
PCBflow Helps Designers Choose Best Manufacturer for the Job
03/28/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
Elementary, Mr. Watson: Ensuring Design Integrity
03/28/2024 | John Watson -- Column: Elementary, Mr. WatsonBack in February, many of us watched the "Big Game." It reminded me of the saying, “It's not how you start that is important, but rather how you finish." It is perfectly okay when you are talking about sports, you get off to a bad first half and need to recover in the second half. However, when it comes to PCB design, this is not a good practice. If things start badly, they usually don't recover. They continue down that same path, costing more money and losing design time.
Arrow Electronics Launches Intelligent Vision Ecosystem
03/27/2024 | BUSINESS WIREArrow Electronics, Inc. is utilizing the onsemi Imager Access System (IAS) module standard for developing intelligent vision solutions for use in robotics, machine vision, commercial cameras and other uses.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.
Synopsys Announces New AI-Driven EDA, IP and Systems Design Solutions At SNUG Silicon Valley
03/25/2024 | PRNewswireSynopsys, Inc. kicked off its annual flagship Synopsys User Group (SNUG) conference in Silicon Valley at the Santa Clara Convention Center with a keynote presentation by Synopsys president and CEO Sassine Ghazi. Ghazi discussed the unprecedented innovation opportunities and challenges that technology R&D teams face in this era of pervasive intelligence.