RapidScat Team Investigating Power System Anomaly
September 12, 2016 | NASAEstimated reading time: 2 minutes
Mission managers at NASA's Jet Propulsion Laboratory, Pasadena, California, and NASA’s Marshall Space Flight Center, Huntsville, Alabama, are assessing two power system-related anomalies affecting the operation of NASA’s ISS-RapidScat instrument aboard the International Space Station. RapidScat measures surface wind speeds and directions over the ocean.
RapidScat is currently deactivated and in a stable configuration. A RapidScat project anomaly response team has been formed, working in conjunction with the space station anomaly response team. RapidScat will remain deactivated as the investigation continues.
On Aug. 19, the RapidScat team was notified by the International Space Station payload operations center at Marshall that the station’s Columbus Module experienced an anomaly with one of the two units aboard the station that distribute electrical power to the module. The anomaly resulted in the loss of power to several payloads aboard the space station, including RapidScat. Later that day, as JPL mission managers attempted to reactivate RapidScat, one of the outlets on the power distribution unit experienced an electrical overload. That outlet powers the station’s RapidScat, High-Definition Earth Viewing Experiment (HDEV) and Solar Monitoring Observatory (SOLAR) payloads.
On Aug. 23, the crew manually isolated RapidScat’s external payload site from its Columbus module power circuit. Ground teams then successfully restored power to the affected power distribution unit outlet, and SOLAR and HDEV powered up successfully, with no sign of electrical overload. This action isolated the outlet overload to the RapidScat site. It is not yet known if the fault is on the Columbus or RapidScat side of the power supply interface.
Mission managers are handling the incidents as two separate anomalies: loss of power to multiple payloads connected to the power distribution unit, and the electrical overload on the unit’s outlet during the attempted reactivation of RapidScat.
RapidScat’s survival heaters are currently on (the heaters receive power from a different Columbus power circuit). The heaters are designed to keep the instrument within allowable flight temperatures indefinitely.
RapidScat, launched on Sept. 21, 2014, was developed as a speedy and cost-effective replacement for NASA’s QuikScat satellite. RapidScat’s all-weather measurements of ocean surface wind speed and direction contribute to improved weather and marine forecasting, including hurricane monitoring, as well as to climate studies.
ISS-RapidScat is a partnership between JPL and the International Space Station Program Office at NASA’s Johnson Space Center, Houston, with support from the Earth Science Division of NASA's Science Mission Directorate, Washington. Other mission partners include the Kennedy Space Center, Florida; NASA Marshall; the European Space Agency; and SpaceX.
Suggested Items
Ambiq Apollo510 Delivers 30x Power Efficiency Improvement to Unleash Endpoint AI
03/27/2024 | AmbiqAmbiq, a technology leader in exceptionally energy-efficient semiconductors for IoT devices, is introducing the new Apollo510, the first member of the Apollo5 SoC family, which is uniquely positioned to kickstart the age of truly ubiquitous, practical, and meaningful AI.
Embedded World 2024: Rohde & Schwarz Presents its Cutting-edge Test Solutions for Embedded Systems
03/27/2024 | Rohde & SchwarzEmbedded systems are the foundation of today’s electronic devices, spanning sectors as diverse as consumer electronics, telecommunications, industrial, medical, automotive and aerospace applications.
AT&S Well Prepared to Benefit from AI Boom
03/26/2024 | AT&SThe rapid progress in the development of artificial intelligence promises to revolutionize all areas of daily life in the coming years. In order to operate such AI systems, an enormous amount of computing power is required, which is provided by a vast network of data centres.
Ventec to Launch New Bondply Dielectrics and Value-Added Services at IPC APEX EXPO 2024
03/26/2024 | Ventec International GroupVentec International Group is to reveal new products for advanced signal integrity and thermal performance, and introduce services, during IPC APEX EXPO 2024, April 9-11 on booth # 4309.
BTU International Redefines Operational Value and Efficiency with the Aurora Platform of Reflow Ovens
03/20/2024 | BTU International, Inc.BTU International, Inc., a leading supplier of advanced thermal processing equipment for the electronics manufacturing market, is proud to announce that its new Aurora platform of reflow ovens is designed to minimize the Cost of Ownership (CoO) while maximizing performance and operational value for its users.