• Today's Articles
  • This Week
  • This Month
  • All
  • Keywords
  • Categories

Institute of Circuit Technology Meriden Seminar, 2018

The Institute of Circuit Technology returned to Meriden, traditionally regarded as the centre of England, for its Annual General Meeting, which was followed by a technical seminar of five presentations, introduced as ever by Technical Director Bill Wilkie.

RTW IPC APEX EXPO: IPC—Industry Trends Moving Forward

Sharon Starr, director of market research for the IPC, discusses industry trends moving forward covering both EMS and PCB. She also mentions the upcoming studies IPC will be conducting in 2018.

RTW IPC APEX EXPO: Zentech Discusses New NIST Legislation

Matt Turpin, president and CEO of EMS firm Zentech Manufacturing Inc., speaks about the NIST 800-171 legislation published by the National Institute of Standards and Technology, and how it is different from other regulations such as ITAR.

Three New Mars2020 Rover Technologies: What Powers the “Body Parts” on the Mars2020 Rover?

The Mars2020 Rover Mission, designed by JPL, is the next NASA Mars Exploration Program mission that is planned to launch in 2020. Some goals of the mission include to check for past signs of life, to help prepare for manned Mars missions, and to collect soil samples of Mars back to Earth.

RTW IPC APEX EXPO: Ventec's Jack Pattie on New Materials, Industry Upswing

Ventec International Group’s Jack Pattie comments on continuing growth in sales, investment in manufacturing and distribution, and new product developments in polyimides, no-flow pre-pregs and thermally conductive materials.

A Plug-in that Connects CAD Software to 3D Printer

Nano Dimension's DragonFly 2020 Pro 3D Printer is a highly accurate and versatile inkjet deposition and curing system for printing professional multilayer circuit boards, structural electronics and antennas. In a sweeping discussion with Nano Dimension USA President Simon Fried, all my questions were answered about this innovative technology.

The Sum of All Parts: Defining Your Customer

These are the most typical ways in which someone will ask us who our customers are. Many times, the purpose is to see whether we work in the same spaces as them or as a way of gauging whether we are “worthy” enough of having them as a customer.

RTW IPC APEX EXPO: Annual Update for IPC Validation Services

Randy Cherry, director of validation services, provides an annual update for IPC validation services, including QML and QPL supplier listings.

EIPC’s Winter Conference in Lyon, France: Day 2 Review

The first day of the conference had started and ended in the dark—a long and technically intense day! After a convivial conference dinner and a good night’s sleep we were back on the bus, this time in daylight at the slightly later time of 8:00 a.m., for the journey from downtown Lyon back to Alstom’s conference facility in Villeurbanne, and it wasn’t raining. In fact, there was even some sunshine later in the day!

Blue Sky for Eagle Electronics

I recently had the opportunity to chat with the new director of sales and marketing at Eagle Electronics, Andy D’Agostino. I’ve visited Eagle before; they are endlessly busy, with good things going on, so I was happy when I learned that Brett McCoy was now COO and another fellow had taken over some of the sales and marketing activities. Andy comes with a wealth of experience and seems to have settled in nicely.

Part 2: EIPC’s 2018 Winter Conference in Lyon, Review of Day 1

We continue with the rest of Pete Starkey’s report on Day 1 of the EIPC Winter Conference in Lyon, France. Included in this segment are presentations by Ventec, Ericsson, TTM and others, plus photos of their evening tour of Alstom.

Start Your IPC APEX EXPO Show Experience Here

As many prepare to travel to California from February 24 to March 1, IPC APEX EXPO 2018 will offer a collection of exciting events for both newcomers and industry veterans, including educational opportunities and showcase exhibitions. Want a sneak peek into the upcoming events at IPC APEX EXPO 2018? This exclusive pre-show coverage publication from I-Connect007 is all about San Diego or bust!

EIPC’s 2018 Winter Conference in Lyon, Review of Day 1

Venue for the 2018 EIPC Winter Conference was the splendid new Alstom Transport Information Solutions facility in Villeurbanne, in the Lyon metropolitan area of the Auvergne-Rhône-Alpes region in eastern France. An extremely popular event—117 delegates represented a total of 20 countries, unprecedented in recent years, and only just fitted into Alstom’s conference suite. Indeed, some were even standing at the back!

Designing Electronics for Harsh Conditions

We expect a lot from our products, especially our electronic products. Think about it: cellphones, wearables, medical devices—for some reason we think they should still work after being immersed in liquid, left outdoors in freezing temperatures or dropped on concrete from a standing position.

SuperDry’s Novel Approach to the Drying Process

Pete Starkey spent a few minutes at the SuperDry booth on the first day of the productroncica show, and chatted with old friend Rich Heimsch, who taught the old dog a few new tricks about the drying process.

Flights Show Promising Technologies from Industry and Academic Partnerships

The technologies ranged from proposed new space suits to cryogenic propellant research, with implications for future NASA space missions as well as other research efforts.

APCT’s Cartel Acquisition Adds Capacity, Technology and Certifications

APCT recently acquired Cartel Electronics and its affiliate, flex and rigid-flex maker Cirtech. During DesignCon 2018, I spoke with APCT President and CEO Steve Robinson about what this acquisition means for the San Jose-based fabricator.

A Conversation with Dorine Gurney, New President of Polar Instruments

Dorine Gurney has recently been named president of Polar Instruments. With a 30-year resume that includes management positions at Mentor Graphics, Lattice Semiconductor and Tektronix, she takes the reins as Ken Taylor heads into retirement. I recently caught up with Dorine at DesignCon 2018 in Santa Clara, California.

Equipment/Process Selection: Case Study of a DMADV Approach to PCB FAB Process Design

This article outlines the approach we took to designing this new phase of our commercial existence, which has now been spun off as a separate business unit known as Greensource Fabrication. This new business unit is expected to go live in 2018.

IPC APEX EXPO: App is Where It’s At

In an interview with I-Connect007, IPC Exhibits Manager Kim DiCianni discusses the IPC APEX EXPO 2018 app and how this powerful tool will keep attendees on track. She also highlights its usefulness for exhibitors.

Improving Military Communications with Digital Phased-Arrays at Millimeter Wave

There is increasing interest in making broader use of the millimeter wave frequency band for communications on small mobile platforms where narrow antenna beams from small radiating apertures provide enhanced communication security.

Making the Right Equipment Selection

For the January 2018 issue of SMT007 Magazine, we invited Kathy Nargi-Toth, president of Eltek USA, and Matt Turpin, president and CEO of Zentech Manufacturing to a discussion on the decision-making process for new equipment, and the key considerations for choosing the best machine solution for a process.

Riding the Tsunami of Success in Asia

Since Phil Carmichael has overseen IPC Asia, the program and its membership have grown substantially, and with good reason. Phil met with Barry Matties at HKPCA to discuss how IPC offerings such as the QML program and helping suppliers become CSR compliant has allowed IPC to become a vital resource for suppliers in Asia.

Cicor’s Approach to Miniaturization: Cost of Function, and More

Barry Matties spoke with Karl Heinz-Fritz, VP of technology, about Cicor’s newest product line, which can shrink the size of a circuit by up to 40%, and the importance of measuring the cost of functionality.

PCB Cooling Strategies, Part 1

With the development of communication and IT industries and the ever-increasing demand for information analysis, many chip makers have racked their brains trying to provide customers with better technology, such as increased computing power and storage capacity of chips as well as diversifying their product offerings.

DARPA Program Aims to Extend Lifetime of Quantum Systems

Whether it is excited electrons emitting photons in a lightbulb or the vibrational frequency of atoms in an atomic clock, quantum phenomena are simultaneously fundamental aspects of nature and the basis of current state-of-the-art and future technologies.

In Terms of Experience, a 10,000-foot View of China

In the past 30+ years of PCB manufacturing in China, you would be hard-pressed to find someone more connected to the pulse of the Asian market than Gene Weiner. Barry Matties met with the industry veteran at HKPCA to get his take on the show, the current and future market conditions of China, and any effect the new U.S. administration might have on trade relations going forward.

CES 2018, Augmented Reality and Much More

The actual CES show is spread across many locations in Las Vegas. The main exhibit halls are at or near to the Las Vegas Convention Center with three buildings, two floors each, all filled with hundreds of booths. Then there is The Sands Convention Center with multiple halls filled to the brim and hotels with their own convention centers and floors of exhibitor suites. With almost 200,000 in attendance, all locations are very busy.

DARPA's Hallmark Seeks to Revolutionize U.S. Space Enterprise Command and Control

The growing complexity of space operations coupled with an increased need for timely decisions demands innovative approaches to battle management command and control (BMC2) technologies.

CES 2018 Showstoppers: LaunchIt and Press Event

“ShowStoppers LaunchIt is about giving innovative entrepreneurs a shot at getting the attention of angel investors on the lookout for innovation and new ventures. It’s also about gaining additional visibility with other industry influencers and dealmakers, as well as with the press who are always looking for the ‘what’s new’ story at CES.”

Weiner’s World—December 2017

Hold on to your seats! 2018 will be a year full of rapid changes, surprises, and growth. M&A activities will flourish. The supply chain will suffer shortages and changes as demand increases, copycats will rush to market, and new markets and potential suppliers will vanish before they are established.

Top 10 Most-Read SMT Articles of 2017

Every year, we like to take a look back at the most popular SMT news and articles. These are the top 10 most-read SMT articles from the past year.

Automation and Traceability Critical for High-Throughput Probe Testing

Peter Brandt, atg’s director of sales for Europe, India and Japan, joined Barry Matties at productronica to share his views on regional variations in electrical testing requirements, automation, traceability, and how to anticipate and satisfy the future demands of the market. Group general manager Dr. Jochen Kleinertz also comments on the need for close cooperation with customers to guide the R&D effort.

What’s Coming in 3D Printing Technology in 2018

First, the arrival of extrusion metal printing. Today's extrusion printers are the most prevalent and, arguably, user-friendly 3D Printers in the market. Now, after years of there being zero metal extrusion printers, there will be two in the new year from Desktop Metal and Markforged. These technologies promise new materials and a higher degree of user friendliness for metal printing.

Isola: Evolving with the Market

In this interview from productronica 2017, Isola’s Karl Stollenwerk discusses the decline of the laminate market in Europe over the past 17 years, current demands on raw materials, and Isola’s new strategy to remain competitive.

DARPA, Santa Continue HO HO HO-liday Team-Up

DARPA’s High-speed Optimized Handling of Holiday Operations (HO HO HO) initiative is celebrating its fourth anniversary this year, and the Agency is proud to continue its tradition of sharing breakthrough technologies to help Santa Claus and his elves more quickly and efficiently complete their holiday duties.

Three Perspectives for HDI Design and Manufacturing Success

Mike Creeden has been in the PCB design industry for more than 40 years now. In June 2003, he founded San Diego PCB Inc., a design bureau serving a variety of industries, including industrial, automotive electronics, medical diagnostics, internet of things (IoT), defense, aerospace, and communications markets. So, we asked Creeden to share his insights about HDI, and how designers and manufacturers can address those issues.

Ocean of Things Aims to Expand Maritime Awareness across Open Seas

The internet of things connects an ever-growing number of smart devices for up-to-the-minute monitoring and tracking of many common events. Head out to most parts of the open ocean, however, and no such capability exists for real-time monitoring of maritime activity.

Equipment Matters in Solder Paste Printing

The solder paste printing process has always been considered a major contributor to yield loss. According to many studies, solder paste printing accounts for up to 70% of all PCB assembly defects. For the December issue of SMT Magazine, we interviewed experts in the solder paste printing process to learn more about the key issues leading to this huge percentage of defects, and the technology developments that are addressing these challenges and improving yields in the process.

Papandrew Leads Advanced Circuits’ New Offshore Division

Advanced Circuits is one of the largest PCB manufacturers in the United States. Now, the company is expanding the range of its services with the launch of its new Offshore Division. Recently, the company hired PCB veteran Greg Papandrew to lead the new division and help the company meet buyers’ demand for offshore PCB sourcing.

HDI: Born in the USA and Making a Comeback

There is no denying that high-density interconnect (HDI) has been around a long time—over 25 years, believe it or not. From almost the moment of its conception in the U.S., the technology was adopted by and used almost exclusively in Asia.

Video from productronica 2017: Rogers Discusses Trends Driving Growth

Dirk Lefelon, European sales manager for Rogers Corporation, discusses his group’s final 2017 results. He also explains what the new year will bring, including increased investment in capacity for the European market, especially for the automotive segment.

The PCB Norsemen: Industry 4.0, AI and CircuitData

As automation works its way onto the shop floors, it still struggles to replace humans in the supporting roles, such as designers, purchasers, brokers, and back-office staff. Where automation on the shop floor replaces humans in doing repetitive manual tasks, the supporting roles (at least some of them) require intelligence to understand and utilise information.

Nine Dot Connects: Good Design Instruction is a True Value-Add

Nine Dot Connects has certainly blazed an interesting trail. The company started out as an Altium reseller, but in less than a decade, Nine Dot Connects has also become a design service bureau and a provider of PCB design instruction, training, and consulting services. I recently interviewed Paul Taubman, technical services director for Nine Dot Connects. We discussed the company’s expansion from VAR to service bureau and content provider, and the changing landscape of PCB design instruction.

Leveraging Industry Shows to Create a Presence

At the recent SMTA International show in Rosemont, Illinois, I had an opportunity to meet with Mark Osborn, president and owner of Colonial Circuits, based in Fredericksburg, Virginia. Colonial Circuits is a supplier of PCBs, mainly for the defense industry.

New I-Connect007 Team Members Tour American Standard Circuits

Recently, Anaya Vardya, CEO of American Standard Circuits, invited two of I-Connect007’s newest team members, IT coordinator Jonathan Zinski and Editor Kiersten Rohde, to tour his facility in West Chicago, Illinois. Happy Holden, resident PCB expert, also joined the newbies on their field trip to ASC. In the following articles, Jonathan and Kiersten describe their experience touring ASC. Special thanks to Anaya for hosting the I-Connect007 team.

Catching up with…Brigitflex

Today, Brigitflex is building unique custom-made boards for companies all over the world, from large defense and aerospace companies to small incubator companies inventing new products. They have become well-known as the shop to go to when nobody else can solve your problems.

Achieving the Perfect Solder Joint: The Many Perspectives on Soldering

For this month's issue of SMT Magazine, we brought several experts together to discuss the many aspects of soldering, from solder paste, to automation, inspection, and the challenges in achieving the perfect solder joint. We also talked about the strategies and parameters to consider to ensure reliable, good solder joints.

'Lighten Up' - Deep Space Communications via Faraway Photons

A spacecraft destined to explore a unique asteroid will also test new communication hardware that uses lasers instead of radio waves.

A Guide to IPC Survey and Report Season

IPC Director of Market Research Sharon Starr found time to discuss the recently conducted and published surveys and research reports and a few others still in the works. These reports are free to survey participants, which is certainly a great incentive for taking the time to complete them. (Hint: That’s a call to action for those of you sitting on the sidelines.)

Strategies for Developing Copper Plating Systems

I-Connect007's Patty Goldman met with Dr. Albert Angstenberger, global technology manager for metallization with MacDermid Enthone Electronics Solutions, while at SMTA International. He presented a most interesting paper on copper pillar plating systems that we hope to publish in The PCB Magazine sometime in the future.

OFFSET 'Sprinters' Encouraged to Share Innovative Ideas for Swarm Systems

DARPA’s OFFensive Swarm-Enabled Tactics (OFFSET) program envisions future small-unit infantry forces using small unmanned aircraft systems (UASs) and/or small unmanned ground systems (UGSs) in swarms of 250 robots or more to accomplish diverse missions in complex urban environments.

IPC Status Update: Training, Standards, and More!

At the recent IPC Fall committee meetings that are co-located with the SMTA International conference and show, IPC’s president and CEO, John Mitchell, sat down for a chat with me for an update on what’s happening at IPC.

Update on IPC’s Validation Services and Hints of What’s to Come

SMTA International is the perfect time to get updates on IPC happenings. One that I’m always curious about is the Validation Services programs. At the busy show, I managed to find a quiet spot so Randy Cherry, IPC’s director of Validation Services, could fill me in on the latest.

Patty's Perspective: (Signal) Integrity for All

Our topic this month is signal integrity, certainly a common one in our industry. Signal integrity is achieved by controlling impedance, so my advice is to do that. There, I’m done. Just kidding…of course I’m not done. But if you are in PCB manufacturing and you think this is just a design problem and doesn’t concern you, please think again.

CONFERS to Establish “Rules of the Road” for On-Orbit Servicing of Satellites

“Rules of the road”—widely accepted norms of safety-related behavior based on common understanding—have existed in various forms over the centuries, and have evolved as new technologies have revolutionized how people and vehicles travel. But how are these “rules” created when common understanding of new capabilities is not yet established?

Institute of Circuit Technology Hayling Island Seminar 2017

This year’s event had a well-chosen and varied programme featuring presentations on process chemistry and R&D consortia, a discussion of controversial standards proposals and a review of the experiences of commissioning new technology in a start-up factory.

RTW SMTAI: AIM's Dr. Mehran Maalekian Speaks on New Alloys for Harsh Environments

Dr. Mehran Maalekian, R&D Manager at AIM Solder, speaks with I-Connect007 Managing Editor Andy Shaughnessy about new alloys that are targeted for high-temperature and demanding applications, particularly in harsh environments, where standard lead-free alloy such as SAC will not perform as well.

Sensible Design: Thermal Management—The Heat is On

Thermal management materials are designed to prolong equipment life and reduce incidences of failure. They also maintain equipment performance parameters and reduce energy consumption by reducing operating temperatures, and minimising the risk of damage to surrounding components. Indirectly, they maintain brand reputation, as the reliability of the equipment will be very dependent upon the effectiveness of the thermal management technique used.

The Value of Process Engineering in PCB Manufacturing

The PCB manufacturing cycle involves a series of interdependent processes starting from raw material and ending with the finished product. Successful PCB manufacturing shops coordinate, control and constantly upgrade their processes to meet the ever-changing market demands.

Ventec Shares Their Insights on the Laminate Market, Part II

The discussion on laminates and markets with Ventec’s Mark Goodwin continues as he talks about the importance of service, where Ventec is headed, and offers some advice on partnering with your supplier.

Weiner’s World—August 2017

IPC is planning to hold a special meeting on automotive electronics for senior executives during IPC APEX EXPO 2019. The meeting will be planned and produced by the IPC Ambassador Council. Its presentations will feature senior members of the entire automotive electronics supply chain.

Hamed El-Abd: A New Beginning, Part 1

While in China recently, Barry Matties joined longtime I-Connect007 friend and contributor Hamed El-Abd of WKK to congratulate him on his upcoming retirement. They reflected on his time spent in the industry, specifically in China, how far it’s come, and where it might be headed next.

The International Paris Air Show with ASC’s Anaya Vardya

The International Paris Air show is the crème de la crème of the world’s trade shows. This is the big one, where all the aircraft, airline and defense aerospace companies meet to introduce new products, discuss the future of aviation, and make deals. This year I decided to talk to my friend Anaya Vardya, ASC’s president and CEO, about the show, why he goes and what it’s like.

DARPA’s Drive to Keep the Microelectronics Revolution at Full Speed Builds Its Own Momentum

To perpetuate the pace of innovation and progress in microelectronics technology over the past half-century, it will take an enormous village rife with innovators. This week, about 100 of those innovators throughout the broader technology ecosystem, including participants from the military, commercial, and academic sectors, gathered at DARPA headquarters at the kickoff meeting for the Agency’s new CHIPS program, known in long form as the Common Heterogeneous Integration and Intellectual Property (IP) Reuse Strategies program.

DARPA's Assured Autonomy Program Seeks to Guarantee Safety of Learning-enabled Autonomous Systems

Building on recent breakthroughs in autonomous cyber systems and formal methods, DARPA today announced a new research program called Assured Autonomy that aims to advance the ways computing systems can learn and evolve to better manage variations in the environment and enhance the predictability of autonomous systems like driverless vehicles and unmanned aerial vehicles (UAVs).

New Challenges Facing Mil/Aero Segment

For this month's issue, we invited a sampling of professionals whose experience centers on the electronics industry in the military and aerospace world, including experts from design, PCB manufacturing, and the assembly arena to sit down with us for a frank discussion. Our discussion centered on the challenges associated with military work, including the new regulatory requirements for cybersecurity, dealing with leaded vs. lead-free components, and the differences and similarities with the commercial world.

Stephen V. Chavez Talks Mil/Aero PCB Design

Stephen V. Chavez, CID+, is the lead PCB designer for the Electronic Systems Center division of UTC Aerospace Systems (UTAS), a military contractor that builds all manner of cutting-edge tools for the American warfigher. He’s been designing military and aerospace PCBs for decades, and he’s a veteran of the United States Marine Corps. I caught up with Steph and asked for his thoughts on designing PCBs for the military and aerospace markets.

Catching up with American Standard Circuits’ Joe Nickerson

Dan Beaulieu had the chance recently to sit down with Camtech Technologies founder and President Joe Nickerson, now the newly appointed American Standard Circuits’ VP of sales, to discuss Camtech Technologies and his new role with American Standard Circuits. It was an interesting talk.

Trilogy Circuits: Mil/Aero Demands Technological, Regulatory Expertise

In the 16 years since its founding, Trilogy Circuits has become one of the go-to companies for mil/aero PCB design and manufacturing. I spoke with Charlie Capers, president and founder of the Richardson, Texas firm, about how he keeps ahead of the game. As he explains, succeeding with mil/aero PCB work requires not only mastery of the technological side, but of the regulations and certifications as well.

IMPACT Interview: Anaya Vardya, American Standard Circuits

I-Connect007's Patty Goldman spoke with Anaya Vardya, president and CEO of American Standard Circuits, a few days after the conclusion of IMPACT, especially wanted his views as a first-timer there.

Catching up with Prototron Circuits Tucson GM Kim O’Neil

This has been an exciting year for Prototron, which has achieved Mil-PRF-31032 and gone into the flex business. Most recently, Prototron received word that they had achieved their AS9100 Rev D, which made me want to check in with Kim O'Neil and find out more.

Strategies for Compliance with DoD Regulations Including ITAR and DFARS

ITAR is usually the topic when compliance with DoD regulations is discussed. But what about DFARS? This article will examine strategies one can implement to ensure that one is compliant with all DoD regulations, by analyzing internal and external factors in relation to procurement and compliance, and by asking the vital questions: what, how, where and to whom?

The Speed of Nouya: Interview with Bao Xinyang of Shanghai Nanya

The theme of the June issue of PCB007 China Magazine is "High-Speed Materials." As is becoming more widely understood, domestic material supply is the only way for China’s high-frequency, high-speed circuit board industry to grow.

X-Ray Inspection of Lead and Lead-Free Solder Joints

As aerospace companies consider the shift to lead-free solder alloys and glues, concerns have been raised about whether their current X-ray inspection and quality-control procedures will still be valid. With lead solder, joints are easily interpreted by the operator or the system imaging software because lead provides excellent image contrasts due to relatively high X-ray absorption compared to that of PCB and component materials. Will this hold true as they shift to lead-free solder compounds?

IPC: Department of Labor Releases RFI to Seek Information on Overtime Regulations

This week, the Department of Labor (DOL) released a Request for Information (RFI) to gather additional feedback from the public on the overtime regulations, which define and delimit exemptions from the Fair Labor Standards Act’s minimum wage and overtime requirements for certain executive, administrative, professional, outside sales and other employees.

Punching Out! Mid-2017 Report on the State of the N.A. PCB M&A Market

One of the most popular questions we receive concerns the market for M&A. Here is our take on the current market for PCB shops in North America. In general, the PCB market in North America is not growing, which means that to grow, shops either must take market share from others, or grow through acquisitions.

Counterfeit Electronic Components Identification: A Case Study

Counterfeit electronic components are finding their way into today's defense electronics. The problem gets even more complex when procuring diminishing manufacturing source parts. This article provides a brief introduction to counterfeit prevention and detection standards, particularly as they relate to the aerospace and defense sector.

Perspectives from a First-Timer

Brad Heath, president and CEO of EMS company VirTex, is a first-time attendee of IMPACT Washington D.C. In an interview with I-Connect007 Managing Editor Patty Goldman, he talks about his impressions of the recent IMPACT Washington D.C. event, and how he thinks the industry benefits from such meetings with the policy makers in the government.

Performance Evaluation of Thin-Film Embedded Resistors

Thin-film microstrip circuits have been widely applied in microwave communications, electronic countermeasures (ECM), and aerospace applications, etc. When manufacturing thin-film ICs, it is very important to apply deposited thin-film resistor material to fabricate high-accuracy and highly stable thin-film embedded resistors. Thin-film ICs call for thin-film resistors that meet stringent requirements.

Using Lead-Free BGAs in a Tin/Lead Soldering Process

Several electronic market segments, such as those electronics used in harsh environments or that have life/system critical functionality, remain exempt from lead-free material restrictions such as the RoHS legislation. While these market segments can use solder containing lead, it is increasingly difficult to procure advanced components in non-ROHS compliant configurations. This article discusses several aspects of having lead-free BGA components in a tin/lead soldering process.

Thermal Indicator Technology for Aerospace Wire Harness Assemblies

Thermal indicator technology was developed into solder sleeves many years ago and has proven to be an effective means of providing visual indication of a reliable solder joint. This article talks about the two types of thermal indicators used in aerospace applications today, and the many benefits that this type of technology.

Mil/Aero Assembly Success

Davina McDonnell, director of marketing at Michigan-based EMS firm Saline Lectronics, discusses the latest technology and business trends driving the military and aerospace industries, the challenges in these markets—including supply chain issues such as obsolete parts and counterfeit components—and their strategies to stay ahead of the competition.

Field Failure is Not an Option

Audra Gavelis of IEC Electronics Corp. discusses the current challenges in electronics assembly for the military and aerospace markets and the new requirements they are getting from their customers. She also talks about strategies in dealing with component obsolescence and lifecycle issues, and new compliance issues that contract manufacturers are facing.

The Skills Gap – Meet People Where They Are!

A perennial concern in the U.S. electronics manufacturing industry is the lack of skilled talent in many parts of the country. According to a recent IPC member survey, most companies have a hard time recruiting qualified production workers, engineers, and other technical professionals.

Patty's Perspective: What Happens in Washington Doesn’t Stay in Washington—It Reaches All of Us

I went to my second IMPACT Washington, D.C. event this year (May 1–3) and, as much as I applauded last year’s event, this one far surpassed it—just ask anyone who was there. In this month’s issue, a special section on IMPACT backs that claim.

Mr. Laminate Tells All: PTFE is About to be Banned by IEC TC111

There, I said it. Technical Committee 111 of the International Electrotechnical Commission (IEC) is preparing to effectively ban PTFE (polytetrafluoroethylene) materials from electronics. As history goes, the electronics industry has focused on only two of the four halogens (bromine and chlorine) to be limited in order to be called “halogen-free” or more accurately “low-halogen.” But now, fluorine is being dragged down too, just because of its location in the periodic table.

A Deep Look Into Embedded Technology

In preparation for this month’s magazine, we set up a conference call with the goal of uncovering the challenges and opportunities related to embedded technology. Invited were a handful of the industry’s heavy hitters in the embedded world: Retired technologist and I-Connect007 Contributing Editor Happy Holden, and Ohmega’s Technical Director Daniel Brandler and Design & Test Engineer Manuel Herrera.

Megasonic Acoustic Surface Treatment Process for Enhanced Copper Electrodeposition in Via Interconnects

A printed circuit board is populated with a multitude of electro-mechanical components plus various active and passive devices such as transistors, capacitors, inductors and resistors, which enable the functionality and assembly of the PCB. Increasing the density of the components on the surface of a board enables greater functionality and use.

Today’s Mil/Aero Enemies: Counterfeits, Obsolescence and Failure

The need for high-reliability electronics, components and assemblies that can perform in harsh operating conditions involving extreme temperatures, vibration, and moisture continue to challenge electronics assembly providers catering to the military and aerospace markets. These are on top of current manufacturing issues such as the miniaturization of products, shrinking component sizes, higher density board assemblies, and the obsolescence of electronic components.

Thin Film NiP Embedded Resistors in Heater Applications

There has been a growing adoption of NiP thin film resistors as heater elements from a diverse group of users including those in the aerospace, defense, high-end computing and the volume consumer electronics market. A novel application has now grown from the validation and reliability testing perspective. Using embedded resistors as heaters to do high-temperature or burn-in testing eliminates the need for thermal chambers.

The Significance of the PCB in the Value Chain of the European EMS Industry

At SMT Nuremberg, Pete Starkey meets with Dieter Weiss, who comments upon the significance of the PCB in the value chain of the European EMS industry, and looks to a future where we embrace an open-minded attitude and a willingness to work together.

A Twist on Printed Electronics: Printing on 3D Shapes

Barry Matties speaks with Optomec’s Pascal Pierra about their LENS printer systems and Aerosol Jet technology, which allows manufacturers to print applications like sensors and antennas on 3D objects. The process is significantly faster and greener than competing technologies.

Better Together: How HDP User Group Showcases the Industry’s Best Side

HDPUG is a non-profit trade organization comprised of members from top companies in the electronics industry, from materials suppliers and manufacturers, to OEMs and end users. Key activities include collaborating on issues facing multiple industries and bringing people together on projects who might not have met otherwise. Barry Matties met HDPUG’s European representative and project facilitator Alun Morgan at the recent EIPC Summer Conference to learn more about the group and current projects.

Embedding Active and Passive Components in Organic PCBs for More Reliability and Miniaturization

Hofmann Leiterplatten GmbH has developed a wide range of products in the last 25 years. New manufacturing know-how has been developed in fabricating organic PCB with embedded devices. A special name, AML (active multilayer), was created to differentiate the surface mount devices (SMD) and the device embedded technology (DET) PCBs. Manufacturing processes that are not typical for standard PCB fabrication shops has been developed.

Happy Holden Second Recipient of I-Connect007 'Good for the Industry' Award

Our second 'Good for the Industry' award has been presented to Happy Holden. After working with Happy for a number of years it is clear to see that he is dedicated to improving the industry. He has a long history in the PCB industry, starting off with HP in the '70s. Not only did he develop HDI, but he then wrote the HDI Handbook, which is provided to readers at no charge.

President Donald Trump Launches Workforce Development Week

Earlier this week President Donald Trump announced “Workforce Development Week.” As such, President Trump spent the last four days promoting job creation and even signed executive order expanding apprenticeship programs.

Global Impact on European PCB Fabrication: EIPC Summer Conference 2017, Day 2

The second day saw the conference room full once more, the late networking session in the bar having resulted in no significant casualties, and I was pleased to accept the invitation to moderate the first session, on processes and materials for flexible PCBs.

Global Impact on European PCB Fabrication: EIPC Summer Conference 2017, Day 1

Electronics industry professionals from 13 countries, mainly from Europe and Scandinavia, others from the USA, but some from as far away as India and Japan, gathered in Meriden, the centre of England, for the EIPC Summer Conference.

Embedded Technology: It’s All Around Us

In the early ‘80s, the PCB company I worked for was testing some of the first material for buried resistors. I can’t recall what customer it was for, or how far along the project got, but over the years it seemed like the technology was slow to be adopted and perhaps ahead of its time.

Copyright © 2018 I-Connect007. All rights reserved.